Installation of Curt C31077 Front Mounted Receiver on 2018 Nissan Titan XD

Question

Question:

I’ve been fighting with these tow hooks installation. Exactly how are they supposed to be mounted? Under the hitch frame or above? Also it seems that the front hole on the hooks are not used, is that true they match to the “sliding” area of the hitch? 2018 Nissan Titan XD SL.

asked by: Phillip F

0

Expert Reply:

Per step 1 of the installation instructions, the tow hook installation bolts and tow hooks are removed from the vehicle prior to installation. What the instructions DON'T very clearly state is that these items aren't reinstalled. The hardware included with the hitch is used and the tow hooks are left off.

The hitch has tow loops incorporated into it, so the factory tow hooks aren't necessary any longer.

expert reply by: Mike L

0

Answer 1

What you need for your 12K winch is the trailer and vehicle electric winch wiring kit #BDW20207. It comes with everything you are looking for with 2 AWG Double Wire, consists of a 24 foot wire - runs from the rear of the vehicle to the battery, and…

view full answer...

Answer 2

For a winch like the Superwinch S6000 Winch #CU854754 you will simply want to use the Trailer and Vehicle Electric Winch Wiring Kit #BDW20207. Since winches can vary on how much they can pull this also affects how much power they need. For a winch…

view full answer...

Answer 3

I reached out to the my tech fit contact at Curt and he said that there is no modification needed to install the Curt Front Mounted Hitch #C31077 to your 2018 Nissan Titan XD Pro-4X. You will remove the tow hooks for installation but then will be…

view full answer...

Answer 4

I reached out to the my tech fit contact at Curt and he said that there is no modification needed to install the Curt Front Mounted Hitch #C31077 to your 2016 Nissan Titan XD Pro-4X. You will remove the tow hooks for installation and then reinstall…

view full answer...

Answer 5

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 6

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Installation of Curt C31077 Front Mounted Receiver on 2018 Nissan Titan XD

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching