Correct B&W Turnoverball Underbed Gooseneck Trailer Hitch for 2019 Ram 2500 Without Prep

Question

Question:

My truck came through with a factory hitch mount. Will BWGNRC907 fit in the mount

asked by: Mark D

0

Expert Reply:

The B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRK1320 is a confirmed fit for a 2019 Ram 2500 without the factory prep package. The factory prep package is a set of five holes (one center and four outer) in the truck bed which is used to secure a gooseneck ball or puck mount fifth wheel hitch. It sounds like you don't have this therefore the above B&W Turnoverball Underbed Gooseneck Trailer Hitch is correct.

The B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRC907 is not correct.

expert reply by: Conner L

0

Answer 1

The 2019 Ram 3500 has a factory installed crossmember mounted under the bed that acts as the install rails for a gooseneck hitch. All you'd need to do is to use the existing hole in the crossmember as a template for the hole that allows the…

view full answer...

Answer 2

Hey Ted, so if you look in the bed of your truck and see 5 holes/pucks that would mean you have the OEM prep. I'd assume if you had it you'd have seen them by now. If you had it you'd only need a ball like the part #C60618. If you…

view full answer...

Answer 3

Yes, we do! It is Curt Custom Underbed OEM-Style Gooseneck Hitch item #C60633. This gooseneck hitch is confirmed to fit both the 6-1/2' and 8' bed lengths of the new 2024 Ram 2500. It has a massive 35,000 lbs capacity and installs in…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Hey Luke, thanks for reaching out! The Curt Custom Base Plate Kit #C56JR for your 2023 Ford F-250 Super Duty actually matches up with the Blue Ox system, but you can still use this with your Blackhawk2 tow bar if you get the Adapter Kit #RM-031. You…

view full answer...

Answer 6

To add an in bed 7-way to your 2023 Ram 2500 you will want the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness item #41157. This harness puts a 7-way connector in the bed of your truck and allows you to keep the one on your bumper.…

view full answer...

Answer 7

The factory prep package on a 2018 Ram 3500 is pretty apparent so odds are you don't have this if you are unsure. If the indentations for the four outer pucks and center gooseneck hitch ball are present but there are no actual holes in the truck…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...