Is Curt Hitch # C13406 a Solid Choice for 2017 Toyota RAV4

Question

Question:

2017 Toyota RAV4 Question: Curt - Code: C13406. Do you recommend the Curt C1406? Interested in your opinion. Thank you,

asked by: Paul W

0

Expert Reply:

The Curt hitch you mentioned # C13406 would be a great choice for you. It's a really solid design so we know it will work great. Check out the install video that I have attached for you.

expert reply by: Jameson C

0

Answer 1

When trimming for the Curt Trailer Hitch Receiver part #C13406 I generally use a razor knife. As you can see in the linked video my buddy Ryan used some snips to do the trimming. There really is nothing you can see in passing after installation…

view full answer...

Answer 2

Hitches actually work great as jacking points generally as they are reinforced steel beams that attach directly to the vehicle frame. I wouldn't think twice about using a hitch installed on your 2018 Toyota RAV4 like the EcoHitch #306-X7219 you…

view full answer...

Answer 3

If you were to run the power wire of the Tow Ready Custom Fit Vehicle Wiring #118578 to anywhere but the positive post of your vehicle battery you would void the warranty of the harness and could potentially damage the wiring of your RAV4 in the…

view full answer...

Answer 4

Trailer wiring harness #118578 fits the Toyota Avalon and the RAV4 which is why you see a video for the RAV4. We haven't had the chance to install it on the Avalon. The portion of the video showing the actual routing of the power wire is not…

view full answer...

Answer 5

The Curt hitch part #C13406 and EcoHitch part #306-X7219 are both a confirmed fit for your 2018 Toyota RAV4 and will provide a trailer hitch that has a concealed crosstube making it less visible than most hitches overall. The key differences are that…

view full answer...

Answer 6

There are a couple key differences between the round tube Curt #C13149 and the square tube Curt #C13406, but from what I could find out, the maximum towing capacity of a 2016 RAV4 is 1,500 pounds, which will make the tongue weight capacity 150 pounds…

view full answer...

Answer 7

For your 2018 Toyota RAV4, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13406. This is the same size hitch receiver as anything that fits the 2001 Jeep Grand Cherokee so if your bike rack fit your Jeep it will fit…

view full answer...

Answer 8

I'll start off by saying that the Curt #C13406 would work just fine to carry a Thule bike rack since the hitch sticks out far enough to where the center of the hitch pin hole to the back of the bumper is going to be roughly 2-1/2"; so as…

view full answer...

Answer 9

The basics for towing a trailer with your 2018 Toyota RAV4 are a hitch and wiring like you mentioned so you are definitely on the right track. For a hitch the Curt part #C13406 is a really great option with plenty of towing capacity and is also…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Is Curt Hitch # C13406 a Solid Choice for 2017 Toyota RAV4

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching