Is the Fan in the Ventline Ventadome Trailer Roof Vent Reversible

Question

Question:

Is the fan on the roof vent reversable?

asked by: Chris

0

Expert Reply:

The fan itself only fits onto the motor one way. If you wanted to reverse the rotation of the fan you would need to switch the positive and negative leads on the back of the motor. I tried this with just the motor and it will reverse the rotation. However, since the fan can only be put on one way and the blades are at a fixed angle, reverse the motor direction will also reverse the air flow direction.

expert reply by: Michael H

0

Answer 1

I went out to the warehouse and the thickness of the rough opening in the roof for installing this vent can be from 1-7/8 inches to 3 inches.

view full answer...

Answer 2

It sounds like you are talking about the ceiling garnish. I have included a link to the ones that we carry to the right. But they are all 14-1/4 inches square. This is the measurement of the part that fits in the opening though, not the overall width…

view full answer...

Answer 3

The interior trim piece on the Ventline Trailer Roof Vent, part #V2092SP-28, fits roofs 1-7/8 inches to 3 inches thick. This unit should work just fine for you. I have included a link to a video review of the vent for you.

view full answer...

Answer 4

The Ventline Ventadome Trailer Roof Vent #V2094SP-30 that you referenced is an exhaust fan, what that means is that it pulls air out of the the trailer. The reason for this is that hot air rises, so when you pull out the air at the top of the trailer…

view full answer...

Answer 5

I went out to the warehouse and pulled a MaxxAir Vent 64643 and a Ventline Ventadome Trailer Roof Vent, #V2092SP-28, and tested them together. The MaxxAir fits over the Ventline vent so the two are compatible. The MaxxAir cover was designed to fit…

view full answer...

Answer 6

We offer a range of complete trailer vent assemblies, such as the Ventline #V2092SP-28 that you referenced, as well as replacement vent covers in various materials and colors. The Jayco website does not provide specifics as to the vent supplied with…

view full answer...

Answer 7

The outer flange that sticks out to mount the MaxxAir MaxxFan Mini Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke Item #MA00-04401M is 16-1/4" x 16-1/4" so as long as you have at least 2-1/2" to 3" of space between the panel…

view full answer...

Answer 8

Furrion uses dual motor allow the fans to move cool air faster and more efficiently than a single motor like you would have with a Dometic unit. Furrion also includes a start capacitor to help store power so that the power draw when the condenser…

view full answer...

Answer 9

The amperage draw of the motor that comes with the Ventline roof vent motor part #V2094SP-28 is 1.2 amps at 13.6 volts.

view full answer...

Answer 10

If you're talking about adding a fan to the Ventline Ventadome Trailer Roof Vent #V2110SP-24 then no, you wouldn't be able to add a fan and would need to purchase a vent that already includes a fan like the Ventline Ventadome Trailer Roof…

view full answer...

Answer 11

For your 28' enclosed trailer I recommend the Furrion Chill HE RV Air Conditioner System - Single Zone - 15,000 Btu - Black #FR23PV. If the ceiling of the trailer isn't too high and you can reach the air distribution box and don't want to…

view full answer...

Answer 12

It sounds like you have a Heng's Roof Vent 122112. This is known as the Ventline Old Style Rounded Dome Trailer Roof Vent. Replacement parts are, #BV0554-01 for white or, #BV0554-03 for black. This will be the continuous hinge style. Please…

view full answer...

Is the Fan in the Ventline Ventadome Trailer Roof Vent Reversible

Product Page this Question was Asked From

Continue Researching