Mounting Single Axle Trailer Fender

Question

Question:

What size screws do I need to replace Karavan Trailer plastic two step fender 15inch wheels? Do you carry screws?

asked by: Colin F

0

Expert Reply:

Trailer fenders such as the Plastic, Single-Axle Trailer Fender # PF11X35W don't actually use screws to install, they use mounting brackets. For these the correct brackets are the Galvanized Steel, U-Shaped, Bolt-On Brackets # PF1135-BKT-2.

The brackets attach with U-bolts which you'd need to source locally and they'd need to measure 3-5/8 inches wide. I've added links to video reviews for you to check out as well.

expert reply by: Kyle S

0

Answer 1

I was able to go out to the warehouse and measure the mounting brackets holes for the PF11X35W and found that it was 5-5/16 inches or 5.3125 inches. If these aren't an exact match, new holes can usually be drilled into the brackets to make them…

view full answer...

Answer 2

Attachment of the fenders to your trailer will depend on your trailer construction. We have several styles of galvanized brackets that you can use to attach fenders to a trailer frame. We have L brackets like the Galvanized Steel, L-Shaped, Bolt-On…

view full answer...

Answer 3

Based on your images and measurements which are a great help I recommend going with the Fulton Single Axle Trailer Fenders #F008584-2. Instead of using your included mounts I recommend cutting them off the frame as they are far to close to your tires…

view full answer...

Answer 4

If you have 12 inch wheels on your Karavan PWC trailer then yes, the Fulton Single Axle Trailer Fender #F008572 would work for you. The distance between the mounting brackets will need to be 22.7 inches to match up to this fender. You might also be…

view full answer...

Answer 5

The Single Axle Trailer Fenders w Mounting Brackets - White Plastic - 13" to 15" Wheels #PF11X35W-2 comes with the mounting brackets to stabilize the fender. You do not need to drill into the backing for that installation. If you choose to…

view full answer...

Answer 6

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 11

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Mounting Single Axle Trailer Fender

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching