Will Lippert Jack It # LC429756 Fit 17 Foot Casita Camper

Question

Question:

I see that someone asked about the Jack-It Bike Rack fitting the 16 foot Casita. Should I assume that it will also fit our 17 foot Casita? Thank you.

asked by: Charlene C

0

Expert Reply:

Yes the Jack It # LC429756 will fit your 17 foot Casita camper just like the 16 foot Casita.

expert reply by: Jameson C

0

Answer 1

Yes, your 16 foot Casita trailer has an A-frame jack on it so the Lippert Jack-It 2 Bike Rack for A-Frame Trailers #LC429756 will fit it and work well. To convert this to a hitch mounted bike rack so that you could use it in the hitch of your vehicle…

view full answer...

Answer 2

The Lippert Jack-It 2 Bike Rack for A-Frame Trailers #LC429756 has 29-1/4-inches of clearance from the bottom mounting plate (that is held to the trailer by your jack) and the bottom of the upper tube. If you refer to the linked photo with dimensions…

view full answer...

Answer 3

Adding Item #LC429756 would not change anything except provide you with extra clearance for a taller jack.

view full answer...

Answer 4

What you'll need to do is compare the dimension picture of the Lippert Jack It bike rack part #LC429756 that I attached to the area you have available between the trailer jack and the propane tanks to determine if this will fit. Most 30 lb tanks…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

I would be happy to help clarify the confusion and set your 2022 Toyota Highlander XSE up with a hitch for your bike rack. The etrailer Trailer Hitch Receiver item #e75ZR does fit your Highlander XSE. This hitch is custom fit and bolts directly to…

view full answer...

Answer 9

Yes, it does! The etrailer Hitch item #e75ZR has been confirmed to fit all models of the 2024 Toyota Highlander including the hybrid. This class III hitch with a 2" receiver is custom fit and bolts to your Highlander with included hardware. I…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

The only hitch that is compatible with the full size 20" spare tire on a 2023 Toyota Highlander is the EcoHitch Hidden Trailer Hitch item #EH35VR. This hitch is custom fit and bolts to your Highlander with included hardware. This is a class III…

view full answer...

Answer 12

In regards to the etrailer Trailer Hitch Receiver part #e75ZR for a 2023 Toyota Highlander, you must trim the underbody panel per the manufacturer. The hitch will come into contact with the panel if not trimmed. The panel however does not need to be…

view full answer...

Will Lippert Jack It # LC429756 Fit 17 Foot Casita Camper

Featured Help Information

Miscellaneous Media

Continue Researching