Replacement Stabilizer Jack for Lippert Model 198641

Question

Question:

Hi. Is it possible to get replacement legs for the Lippert 198641 jack?

asked by: Tom

1

Helpful Expert Reply:

I have a solution for you, but the Lippert 198641 jack that you mentioned has been discontinued, and parts are no longer available. You will need to replace your old jack, which can be done with the Lippert Components High-Speed Power Stabilizer Jack - Black Waterproof Switch Kit - 30" Lift # LC298707.

I've linked a short video of this stabilizer jack for you to have a look at.

expert reply by: Erik B

1

Answer 1

Unfortunately, there are no replacement legs available for the Lippert Power Stabilizer Jacks like #LC298707, you'll need to replace the whole assembly. It's a good idea to replace the whole unit when there is significant damage. I appreciate…

view full answer...

Answer 2

The Lippert Components Power Stabilizer Trailer Jack #LC298707 that you referenced will work as a replacement for your 198641 stabilizer jack. If you use the Linc Analog Remote #LC292614 for your RV then this is compatible with that as well. The part…

view full answer...

Answer 3

I do have a solution for you to have a working stabilizer again but unfortunately when I spoke with my contact at Lippert he said that the legs on your 198641 unit are not replaceable alone. Instead you will need to replace the whole stabilizer jack…

view full answer...

Answer 4

Even though the 337199 has been discontinued there's still quite a few out there on the market so you could still get an exact replacement with the Lippert High-Speed Power Stabilizer Jack - 30" Lift #LC337199 or swap to their other model,…

view full answer...

Answer 5

Yes, the Lippert Components Power Stabilizer Jack #LC298707 that you referenced is what you will want to replace your jack with the part number 369777 (as pictured) with. My contact at Lippert Components verified this.

view full answer...

Answer 6

The Lippert High-Speed Power Stabilizer Jack part #LC298707 would be an excellent replacement option for the now discontinued 337199 model. It does come with a new switch so you can either wire this up or reuse the existing, either way the switch…

view full answer...

Answer 7

I did some digging and it looks like you are in need of the Lippert replacement landing gear motor part #LC138445 for a replacement motor for your Lippert stabilizer jacks.

view full answer...

Answer 8

The difference is the color of the switch kit that either has. The part #LC369774 that you referenced has a white switch kit and the part #LC298707 has a black switch kit.

view full answer...

Answer 9

I was able to cross-reference your part number and the C-800 Replacement Klauber Motor for Standard Lippert Components Electric Stabilizer Jacks #LC138445 is the updated motor for your trailer jack. It will be a direct replacement.

view full answer...

Answer 10

I attached a picture that shows the install instructions for the Lippert Components High-Speed Power Stabilizer Jack #LC298707 that you referenced and in it you'll notice a set distance isn't specified for where it has to install on the…

view full answer...

Answer 11

The best place to look for the towing capacities of a vehicle is in the owners manual. The manual will give you what the vehicle is capable of. Usually on the hitch there is a sticker with the hitches capacities. Which ever is lower, the vehicle or…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Replacement Stabilizer Jack for Lippert Model 198641

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching