How Much Bar Space is Needed for Yakima SlimShady Awning

Question

Question:

Ive got a bike carrier on my roof already. Do I have enough space to fit the Slim Shady too?

asked by: SR

0

Expert Reply:

I don't know the length of your bars but the answer is definitely yes. Bike carriers generally don't take up a lot of bar space and the Yakima SlimShady awning, part # Y36VR, only takes up about 4-1/2 inches when it's folded in.

Also, if you'd like the SlimShady can be mounted on the bars outside of the feet as long as the bars stick out is at least 3 inches past the feet.

expert reply by: Charles S

0

Answer 1

Yes, the Yakima SlimShady Awning #Y36VR that you referenced does comes with lock cores built into the clamps that attach to the crossbars.

view full answer...

Answer 2

Yes, you can mount the Yakima SlimShady Roll-Out Awning #Y36VR to either the rear rail or on the sides of the basket by attaching to the bottom bars of your MegaWarrior rooftop cargo basket #Y07080. My Yakima contact confirmed no adapters or…

view full answer...

Answer 3

Unfortunately there are not any aftermarket roof racks that fit the 2020 Subaru Onyx XT due to the roof rack system that is already installed from the factory. The Thule HideAway Awning - Roof Rack Mount - Waterproof - 80 sq ft #TH490010 cannot…

view full answer...

Answer 4

To mount the: -Yakima SlimShady Awning - Roof Rack Mount - Clamp On #Y36VR to your Yakima MegaWarrior Large Roof Rack Cargo Basket #Y07080. You will just need to place the mounting brackets about 6" from the outside rail of the basket to…

view full answer...

Answer 5

The Yakima SlimShady part #Y36VR that you referenced is designed to provide shade as well as block rain.

view full answer...

Answer 6

The Yakima SlimShady Awning #Y36VR fits the round bars of your Yakima rack with it's included clamps. If you no longer have the clamps that came with the awning then you can replace the two clamps with Replacement Clamp Assembly for Yakima…

view full answer...

Answer 7

Yes, the clamps for Yakima SlimShady Awning part #Y36VR will work just fine on a Adarac Truck Bed Ladder Rack with 1-1/2" x 1-1/2" crossbars according to my contact at Yakima.

view full answer...

Answer 8

I have a solution for you, but those parts are not available from Yakima at this time. Instead, you'll need to replace the entire assembly on your Yakima Slim Shady Awning #Y36VR. You can use the Replacement Clamp Assembly for Yakima…

view full answer...

Answer 9

The only thing that would keep you from using a Yakima SlimShady Awning - Roof Rack Mount - Clamp On - 42 Sq Ft #Y36VR on a roof rack with a Rocketbox and Hullavator is the amount of bar space you've got. The SlimShady awning is only sits…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

How Much Bar Space is Needed for Yakima SlimShady Awning

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching