Will the Yakima SlimShady Awning Clamps Work On a Adarac Truck Bed Ladder Rack

Question

Question:

I have the Adarac bed rack on my 15 Tundra. It has large square crossbars. 1.5” tall/ 1.5” wide I believe. Curious if the Yakima adapter clamp that holds that mounts to the crossbars would fit these larger crossbars without issue?

asked by: Ryan N

0

Expert Reply:

Yes, the clamps for Yakima SlimShady Awning part # Y36VR will work just fine on a Adarac Truck Bed Ladder Rack with 1-1/2" x 1-1/2" crossbars according to my contact at Yakima.

expert reply by: Conner L

0

Kevin

9/5/2020

I also have this system and have the same question. Will the Yakima Universal Kayack/Fishing Kayak racks fit on the Adarac system 1.5 x 1.5?

Reply

Jon G.

9/8/2020

Yes they will fit. The Yakima HD bars are 3" wide x 1-1/2" tall and all of those products fit the HD bars so you're good to go.

Reply

Answer 1

I don't know the length of your bars but the answer is definitely yes. Bike carriers generally don't take up a lot of bar space and the Yakima SlimShady awning, part #Y36VR, only takes up about 4-1/2 inches when it's folded in. Also, if…

view full answer...

Answer 2

Yes, the Yakima SlimShady Awning #Y36VR that you referenced does comes with lock cores built into the clamps that attach to the crossbars.

view full answer...

Answer 3

The Yakima SlimShady Awning #Y36VR fits the round bars of your Yakima rack with it's included clamps. If you no longer have the clamps that came with the awning then you can replace the two clamps with Replacement Clamp Assembly for Yakima…

view full answer...

Answer 4

I have a solution for you, but those parts are not available from Yakima at this time. Instead, you'll need to replace the entire assembly on your Yakima Slim Shady Awning #Y36VR. You can use the Replacement Clamp Assembly for Yakima SlimShady…

view full answer...

Answer 5

The Yakima SlimShady part #Y36VR that you referenced is designed to provide shade as well as block rain.

view full answer...

Answer 6

Yes, I confirmed with Yakima that the Yakima BigCatch Kayak Carrier #Y04091 will work with your Adarac square crossbars that measure 1-1/2 inches thick.

view full answer...

Answer 7

To mount the: -Yakima SlimShady Awning - Roof Rack Mount - Clamp On #Y36VR to your Yakima MegaWarrior Large Roof Rack Cargo Basket #Y07080. You will just need to place the mounting brackets about 6" from the outside rail of the basket to allow…

view full answer...

Answer 8

The square crossbars of the Adarac Access Ladder Racks like the part #A90190 are the same dimensions as the Thule crossbars as they are 1-1/2 inch by 1-1/2 inch. We don't carry a K-Guard as that's a South African Thule product but the Thule…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Will the Yakima SlimShady Awning Clamps Work On a Adarac Truck Bed Ladder Rack

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching