Will The Front Mount Hitch for a 2019 Toyota Tundra Work With TRD Package

Question

Question:

hello , i was looking to add a front hitch to my 2019 tundra and threw the research i cant find info on the trd pro skid plate ? Can i upgrade the skid plate to trd pro and not have to remove the hitch each time the oil needs replaced. i am still under warranty and dont look forward to all the extra work. Thank You

asked by: Justin

0

Expert Reply:

The front mount trailer hitch options for a 2019 Toyota Tundra, the Curt Front Mount Trailer Hitch Receiver part # 31198 or Draw-Tite Front Mount Trailer Hitch Receiver part # 65080 will both work of TRD models. That said, you will either need to cut a 4" hole into the skid shield so you can access the oil filter or leave the skid shield off completely but that's up to you.

expert reply by: Conner L

0

Answer 1

Curt Front Mount Trailer Hitch #31198 is a custom-fit item made specifically for the Toyota Tundra and Sequoia. Its installation presumes the vehicle is otherwise stock since hitch makers cannot know/test every possible other aftermarket product on…

view full answer...

Answer 2

From what I could find, the skid plate on your 2020 Tundra will need to be removed to create a four inch hole for oil filter access, and then either reattached or it may be left off. I included a picture from the instructions that shows where to…

view full answer...

Answer 3

The Draw-Tite Front Mount Trailer Hitch Receiver #65080 is designed to fit the Toyota Tundra starting with the 2007 model. It is likely that the door for oil filter access you're referencing on your 2021 was added later or is present in…

view full answer...

Answer 4

I was able to get the measurements you were looking for of the Draw-Tite front mount hitch that fits your 2020 Toyota Tundra, which is the following: - Draw-Tite Front Mount Trailer Hitch Receiver #65080 The hitch is similar to the Curt #31198 in…

view full answer...

Answer 5

I believe you are asking for a front mount hitch for the 2018 Toyota Tundra. There are two options, Curt Front Mount Trailer Hitch Receiver part #31198 and Draw-Tite Front Mount Trailer Hitch Receiver part #65080. Both options install the same, have…

view full answer...

Answer 6

The two front mount hitches available that are confirmed to fit your 2015 Toyota Tundra, the Draw-Tite #65080 and the Curt #31198, are extremely similar to each other and differ only in their slight design variation. Both hitches will provide a 2…

view full answer...

Answer 7

Both the Draw-Tite Front Receiver #65080 and Curt Front Receiver #31198 can be installed on your 2021 Toyota Tundra without cutting the hole in the skid plate. The purpose of the hole is to allow for easier access to the oil filter for routine…

view full answer...

Answer 8

The biggest difference between the Curt front hitch part #31198 and Draw-tite front hitch part #65080 is that the Draw-tite receiver tube extends out more than the Curt by over an inch. This makes it more visible when nothing is mounted to it.…

view full answer...

Answer 9

The Curt Front Mount Hitch #31198 and the Draw-Tite #65080 for your 2018 Toyota Tundra are indeed just about identical in terms of their capacities and where they will mount on the truck. One thing that does differentiate the two models, and the…

view full answer...

Answer 10

On the Curt front mount receiver #31198 there is a note stating that the skid shield will either have to be removed or you can trim it and reinstall in on your 2018 Toyota Tundra. For the Draw-Tite receiver #65080 we have a note stating that the skid…

view full answer...

Answer 11

I had our warehouse measure each of the front mount trailer hitch receivers you mentioned, and the dimensions are as follows. The Curt #31408 measures 32-3/4" long x 8-3/4" wide, the Draw-Tite #65080 measures 36-3/4" long x…

view full answer...

Answer 12

For your 2018 Toyota Tundra we have the Curt front hitch part #31198 and the Draw Tite part #65080 both as a confirmed fit and both really good options. Both install the exact same and have same capacities, but I like the Curt better as it's made…

view full answer...

Will The Front Mount Hitch for a 2019 Toyota Tundra Work With TRD Package

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching