Will the Draw-Tite Front Mount Hitch 65080 Fit a Tundra TRD With a Skid Plate?

Question

Question:

Will this work with the TRD skid plate on at 2020 Tundra TRD Pro

asked by: Scott

0

Expert Reply:

From what I could find, the skid plate on your 2020 Tundra will need to be removed to create a four inch hole for oil filter access, and then either reattached or it may be left off. I included a picture from the instructions that shows where to cut the hole if you decide to reinstall it as well.

expert reply by: Lazer S

0

65080 Skip Plate Hole
(click to enlarge)

Answer 1

Both the Draw-Tite Front Receiver #65080 and Curt Front Receiver #31198 can be installed on your 2021 Toyota Tundra without cutting the hole in the skid plate. The purpose of the hole is to allow for easier access to the oil filter for routine…

view full answer...

Answer 2

The biggest difference between the Curt front hitch part #31198 and Draw-tite front hitch part #65080 is that the Draw-tite receiver tube extends out more than the Curt by over an inch. This makes it more visible when nothing is mounted to it.…

view full answer...

Answer 3

Curt Front Mount Trailer Hitch #31198 is a custom-fit item made specifically for the Toyota Tundra and Sequoia. Its installation presumes the vehicle is otherwise stock since hitch makers cannot know/test every possible other aftermarket product on a…

view full answer...

Answer 4

I believe you are asking for a front mount hitch for the 2018 Toyota Tundra. There are two options, Curt Front Mount Trailer Hitch Receiver part #31198 and Draw-Tite Front Mount Trailer Hitch Receiver part #65080. Both options install the same, have…

view full answer...

Answer 5

The front mount trailer hitch options for a 2019 Toyota Tundra, the Curt Front Mount Trailer Hitch Receiver part #31198 or Draw-Tite Front Mount Trailer Hitch Receiver part #65080 will both work of TRD models. That said, you will either need to cut a…

view full answer...

Answer 6

The Draw-Tite Front Mount Trailer Hitch Receiver #65080 is designed to fit the Toyota Tundra starting with the 2007 model. It is likely that the door for oil filter access you're referencing on your 2021 was added later or is present in certain…

view full answer...

Answer 7

On the Curt front mount receiver #31198 there is a note stating that the skid shield will either have to be removed or you can trim it and reinstall in on your 2018 Toyota Tundra. For the Draw-Tite receiver #65080 we have a note stating that the skid…

view full answer...

Answer 8

The two front mount hitches available that are confirmed to fit your 2015 Toyota Tundra, the Draw-Tite #65080 and the Curt #31198, are extremely similar to each other and differ only in their slight design variation. Both hitches will provide a 2…

view full answer...

Answer 9

The Curt Front Mount Hitch #31198 and the Draw-Tite #65080 for your 2018 Toyota Tundra are indeed just about identical in terms of their capacities and where they will mount on the truck. One thing that does differentiate the two models, and the…

view full answer...

Answer 10

I had our warehouse measure each of the front mount trailer hitch receivers you mentioned, and the dimensions are as follows. The Curt #31408 measures 32-3/4" long x 8-3/4" wide, the Draw-Tite #65080 measures 36-3/4" long x…

view full answer...

Answer 11

I was able to get the measurements you were looking for of the Draw-Tite front mount hitch that fits your 2020 Toyota Tundra, which is the following: - Draw-Tite Front Mount Trailer Hitch Receiver #65080 The hitch is similar to the Curt #31198 in…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Will the Draw-Tite Front Mount Hitch 65080 Fit a Tundra TRD With a Skid Plate?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching