Replacement Set of 13 inch Trailer Wheel Fenders

Question

Question:

Looking to purchase replacement fenders for a yacht club trailer with 13 tires do they come as a set?

asked by: Jeff

0

Expert Reply:

We do offer trailer replacement fenders in sets for 13 inch wheels like what you have with the CE Smith Fenders # CE19503-2. This is a very common style of fender set that will work great for you.

expert reply by: Jameson C

0

Answer 1

Thank you for the photos! According to my information and what you sent in, your best option for a replacement fender is the CE Smith Black Fender: CE Smith Single Axle Trailer Fender w/ Top and Side Steps - #CE19503 (Qty 1) CE Smith Single Axle…

view full answer...

Answer 2

I went out to our warehouse to take a look at both the CE Smith Single Axle Trailer Fenders - 12" Grey #CE19502-2 and the larger 13" Black #CE19503-2. Both options represent the only color available from CE Smith in the respective sizes.…

view full answer...

Answer 3

We have a very close option with the #CE19503-2 which is off by only 1/4 of an inch to the measurements you listed. It measures 29-3/4 inch for the inside portion and 33-3/4 inch for the outside portion.

view full answer...

Answer 4

We do have a selection of fenders for 13" wheels that you can use to replace your current fenders. Among our linked selection we have different constructions like aluminum, plastic, and steel. These fenders can mount via brackets or welding…

view full answer...

Answer 5

I have a solution for you but #F008559 is not what you need because the mounting holes for this fender are on top not on the side like what you need and it's a slightly different style as well. For the exact same style of fender you want the…

view full answer...

Answer 6

I was able to pull up your 2012 WC224 trailer and found that it has 13 inch trailer wheels and has a fender that looks identical to the part #F008583. This fender would work well for you and would be what we recommend. I attached a review video for…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 11

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...