2012 Yacht Club WC224 Trailer Fender Recommendation

Question

Question:

need to get passenger fender for 2012 wc224 yacht club traler

asked by: Shaun C

0

Expert Reply:

I was able to pull up your 2012 WC224 trailer and found that it has 13 inch trailer wheels and has a fender that looks identical to the part # F008583. This fender would work well for you and would be what we recommend.

I attached a review video for you to check out as well.

expert reply by: Jameson C

0

Answer 1

To determine which replacement fender is needed for your Yacht Club Jetski Trailer WC218, you'll want to measure the overall length of your current fenders. I have included a link to all of our black trailer fenders for you. From there you…

view full answer...

Answer 2

I have a solution for you but #F008559 is not what you need because the mounting holes for this fender are on top not on the side like what you need and it's a slightly different style as well. For the exact same style of fender you want…

view full answer...

Answer 3

The dimensions you have are nearly identical to the CE Smith #CE19504-2 you looked at. However, these are designed for 14" wheels. For 15" wheels you would need the Fulton #F008585-2. These are slightly longer and taller at…

view full answer...

Answer 4

For the 13" #CE19503-2 there is a distance between the two outside mounting on center of 33-3/4 inches and 29-3/4 inches between the two inside holes. The holes on the mounting surfaces are spaced apart 5 inches vertically and 2 inches…

view full answer...

Answer 5

The best option we'd have to replace the fenders on your trailer would be the Fulton Single Axle Trailer Fenders with Top and Side Steps part #F008584-2. The measurements we have for this fender appear to be very similar to that of the…

view full answer...

Answer 6

It sounds like you are looking for the EZ-LOADER Gray Plastic Fender for 13" Tires, w/Cutout part 5291132 and 5291131. These are made for 13" tires and have a marker light cutout. The closest thing I have is the CE Smith Single Axle…

view full answer...

Answer 7

The CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Black Plastic - 14" Wheels - Qty 2 #CE19504-2 and single fender #CE19504 will attach to your trailer's existing brackets. If your trailer doesn't have the brackets then you…

view full answer...

Answer 8

I went out to our warehouse to take a look at both the CE Smith Single Axle Trailer Fenders - 12" Grey #CE19502-2 and the larger 13" Black #CE19503-2. Both options represent the only color available from CE Smith in the respective sizes.…

view full answer...

Answer 9

The recommended clearance with leaf spring suspension on an unloaded trailer is between 2 - 2-1/2 inches. You should have sufficient clearance with your loaded trailer, as leaf springs only tend to deflect 1-1/2 inch when carrying a load.

view full answer...

Answer 10

I wish we had a way to look up your trailer info and figure out what hub it would take but that's not something we can do. In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The…

view full answer...

Answer 11

After taking a look at your pictures you need a center cap plug. Unfortunately we do not have a center cap plug with the dimensions you need for your wheel. Another option would be to remove your wheel and pop out the center cap and measure the pilot…

view full answer...

Answer 12

We do offer trailer replacement fenders in sets for 13 inch wheels like what you have with the CE Smith Fenders #CE19503-2. This is a very common style of fender set that will work great for you.

view full answer...

2012 Yacht Club WC224 Trailer Fender Recommendation

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching