Transmission Cooler and Radiator Adapter Fitting for 2016 Dodge Grand Caravan

Question

Question:

Good morning, I want to purchase a Derale transmission cooler, model 13612. Will I need any other parts for use in a 2016 Dodge Grand Caravan?

asked by: Will B

1

Helpful Expert Reply:

The Derale # D13612 will work just fine for your 2016 Dodge Grand Caravan. The cooler includes the hose, hose clamps and necessary hardware for installation, but you'll also need the # D13035 adapter fitting. The cooler would install inline with the return line from the radiator to the transmission as shown in the provided video which will walk you through the installation process. The video shows a slightly different cooler being used, but the procedure would be just about identical with the # D13612.

In addition to the install video, I'll also link to some articles that explain how transmission coolers work.

expert reply by: Mike L

1

Answer 1

With a new vehicle you are doing the right thing in setting up everything to safely tow your boat. I can help you out with that. First I recommend the Draw-Tite Max-Frame Trailer Hitch, part #75579. This is a Class lll hitch and it has a 2-inch…

view full answer...

Answer 2

For as much load leveling as it sounds like you need I would recommend the Air Lift kit part #AL60814 for your 2016 Dodge Grand Caravan as it will allow you to fine tune the amount of suspension support you need. Be sure not to exceed the towing…

view full answer...

Answer 3

If you're looking to improve your ride quality and reduce the rear-end sag experienced when towing, a set of Coil-Rite air helper springs like #F4169 offered by Firestone would install inside your existing coil springs and would offer additional…

view full answer...

Answer 4

The etrailer.com hitch part #E98854 is a confirmed fit 2 inch hitch with plenty of capacity that is confirmed as a fit for your 2018 Dodge Grand Caravan. I recommend this hitch highly as it has great towing capacities at 4,000 lb trailer weight and…

view full answer...

Answer 5

I recommend the etrailer Trailer Hitch Receiver #e98854 for your 2016 Dodge Grand Caravan. This is a class III receiver which will accept a 2" ball mount. As your trailer has a 4-way flat connector you will need the Curt Vehicle Wiring Harness…

view full answer...

Answer 6

As long as you have a trailer hitch like the Draw Tite part #75579 installed on your 2016 Dodge Grand Caravan that is rated for use with weight distribution systems the Reese Steadi-Flex part #66557 would be a great option for your tongue weight of…

view full answer...

Answer 7

After installing an aftermarket transmission cooler, you typically do need to add a bit more transmission fluid to the system to compensate for adding the cooler. With a cooler as large as the Derale Series 8000 Transmission Cooler Kit #D13503, it…

view full answer...

Answer 8

You'd want to leave your 2016 Dodge Grand Caravan transmission in overdrive for the most part. If you found yourself towing in a hilly area with a lot of upshifting and downshifting you might select a lower gear just to prevent some of that but…

view full answer...

Answer 9

For your 2016 Dodge Grand Caravan the best option is the Draw Tite hitch part #75579 because of the price, it's high towing capacities, and because it has the shortest install time listed for it. Check out the install video I attached for more…

view full answer...

Answer 10

The Air Lift Vehicle Suspension, part #AL60814, is designed to fit your 2008 Dodge Grand Caravan. These air springs fit inside the coil springs of your Grand caravan and will help load-leveling support up to 1,000 lbs. This system will not increase…

view full answer...

Answer 11

The hitches we offer for your 2016 Dodge Grand Caravan like the #e98854 do not require the vehicle to have the factory tow package. This hitch fits the versions of the vehicle that do not have the tow package just as well as the ones that do. I…

view full answer...

Answer 12

The Timbren suspension system, #TDVRRT, fits inside of the coil springs on your 2010 Chrysler Town and Country. You will remove the old bump stops from this location and insert the Timbren system in their place. I have included a link to the…

view full answer...