Can Brake Signal be Isolated from Hopkins Wiring for Flat Towing a 2019 Ford F-150

Question

Question:

I have a 2019 Ford F-150 I tie behind my motorhome. I have a Hopkins HM56009 hooked to my truck but am wondering if I can also hook an independent brake wire to that wiring adapter?

asked by: Cody C

0

Expert Reply:

To isolate the brake signal from the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56009 on your 2019 Ford F-150 you can just tie in the Pacer Performance 3rd Brake Light Logic Module # PP20-702.

Attached is a photo of the installation instructions for you to check out.

expert reply by: Jon G

0

click to enlarge

Answer 1

Yes, because this harness wires your Ford F-150 as a combined system you will need the Roadmaster Brake-Lite Relay Kit for Towed Vehicles #RM-88400 while flat towing your 2018 Ford F-150 with the Hopkins Custom Tail Light Wiring Kit for Towed…

view full answer...

Answer 2

To tell if your vehicle has LED lights or incandescent lights, you really need to look at the light bulb itself as the outside lenses can be deceiving. Incandescent lights have a bulb with a filament like #VX-SDH11 where you see the wires making a…

view full answer...

Answer 3

For help with wiring up the 6-Way I have included a picture that shows how both a vehicle side and trailer side 6-Way are normally wired. On a 6-Way the 12-volt power wire could be attached to the center pin or the pin in the 10 o'clock or 2…

view full answer...

Answer 4

Although we have wiring harness options that will work for your truck, the Hopkins #HM56009 taillight harness for towed vehicles wouldn't work for your 2021 Ford F-150, it only fits up through the 2020 model year. I'd recommend using a diode…

view full answer...

Answer 5

I do have an option for you but there is not enough room inside the tail light housing on a 2019 Ford F-150 to install a bulb and socket kit. That said, I wouldn't want to drill into a tail light on a newer truck anyhow wires which is why we have…

view full answer...

Answer 6

Given the measurements you provided, the TruRyde #34823 double lip seal would be the correct replacement seal for your boat trailer. I tried doing a Google search for the YTI203205 seal you mentioned, and got no results. Just to be sure, I'd…

view full answer...

Answer 7

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 11

Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…

view full answer...

Answer 12

To determine if your motorhome has the Tiffin air brake setup or Freightliner BrakeSync you'll need to look at the rear and see if there's an quick disconnect fitting for your air line. The standard Tiffin air coupler fitting would look like…

view full answer...