Feet and Fit Kit Compatible with Old Thule Load Bars on 2015 Ford F-150

Question

Question:

I have a set of Thule square bars that I want to put on my F150 Ford XLT. I made contact with Thule and they said they no longer manufacture the fit kit # 1787 and the foot pack 480 that I would need. Does etrailer carry these mentioned parts for the Thule square bars.

asked by: Kim R

0

Expert Reply:

We no longer carry the Thule parts you are seeking, however, the Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4 # INSUT and Custom Fit Kit # INK139 will work well with your old Thule square load bars. This will give your the system you were seeking. I've attached a video of this system to assist.

expert reply by: Jason S

0

Answer 1

Yes, you can use your old Thule crossbars, with no channel underneath the crossbar, and your Thule accessories with the Inno setup. Provided your Thule crossbars are at least 46" and they will not extend beyond the side mirrors of your…

view full answer...

Answer 2

If your 2022 Toyota Highlander has flush mounted rails that run from the front to the back of the vehicle then I recommend the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 #Y01156 SkyLine Towers for Yakima Crossbars…

view full answer...

Answer 3

Thule changed their square bar roof rack crossbars a few years ago with the EVO setup like you mentioned. The difference is now that the bars attach to the feet of the rack via a channel on the bottom of the bars instead of the older style that…

view full answer...

Answer 4

The correct Yakima Landing Pads for your 2020 Toyota Highlander XLE with fixed mounting points on the roof rails are the Yakima Landing Pad 28 #Y66VR. These landing pads will allow you to use the 50" Yakima JetStream Crossbars in Black #Y00425…

view full answer...

Answer 5

INNO square crossbars and Thule square crossbars are the same dimensions, 7/8 inch by 1-1/4 inch. The part #INTR would then be compatible with Thule crossbars. To complete the rack for your 2015 Jeep Grand Cherokee you would also need the #INTR132.

view full answer...

Answer 6

If the Thule square bars you currently have are the Thule Evo square bars, then you can use them on your 2020 Toyota Highlander. In order to do so, you will need to get the correct fit kit and feet for your Highlander. - Evo Fixpoint Feet for Thule…

view full answer...

Answer 7

From the looks of your photo, it looks like you have Thule SquareBar Evo Crossbars #TH712400. In order to mount these Thule crossbars on your flush rails, you can use the Inno Feet for Square Crossbars - Track Systems and Fixed Mounting Points -…

view full answer...

Answer 8

The Thule Podium 460 you referenced for old square bars has been discontinued so that is why the expert answers suggest using the Evo Fixpoint Feet #TH49SC for use with the new Thule SquareBar that have a slot in the bottom like the aero style bars.…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...