Recommended Trailer Wiring Harness for a 2020 Lexus RX 350 F-Sport

Question

Question:

I dont have a tow package and need a wiring harness. It doesnt seem that this part will work for me. I bought part number 118252 from etrailer.com but it doesnt work as the lights dont turn on. Please advise on which part I need or how to go about completing the harness part of my trailer installation.

asked by: Max K

0

Expert Reply:

I do have an option but there are currently no plug-n-play trailer wiring harnesses for a 2020 Lexus RX 350 with F-Sport Package. Therefore, if you need to tow a trailer your best option would be the ZCI Circuit Protected Vehicle Wiring Harness part # 119250KIT since it's the only option which would not require splicing.

expert reply by: Conner L

0

Answer 1

There is a trailer hitch receiver that my contact at Draw-Tite was able to confirm will fit your 2021 Lexus RX 350 F-Sport which is the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #75540. The #75540 has a hidden…

view full answer...

Answer 2

I have taken a look at the Draw-Tite Max-Frame Trailer Hitch Receiver item #75540. This hitch is confirmed to fit your 2022 Lexus RX 350 and it does require some minor trimming of the lower portion of the rear trim. I have linked a couple of pictures…

view full answer...

Answer 3

There is a simple plug-in harness for your 2020 Lexus RX 350 with the factory tow package. What you need is the Hopkins Plug-In Simple Wiring Harness for Factory Tow Package #HM11141945. This installs very simply by only plugging into the harness…

view full answer...

Answer 4

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 5

I'm assuming that you're needing to know so you can choose the correct wiring harness, correct? You could call your Lexus dealer and give them your VIN, and they should be able to tell you how your RX350 is equipped. Or, you could remove the…

view full answer...

Answer 6

Installing the Draw-Tite Max-Frame Trailer Hitch Receiver #75540 will require some under body fascia trimming as well on your 2021 Lexus RX 450h. I have linked the installation instructions near the bottom of the page which will show you all the…

view full answer...

Answer 7

It doesn't appear that we have a recessed mount light that would fit a 1-7/8" cutout hole at this time, but you could still use a surface mount light and just make sure it was large enough to cover the cutout hole and that mounting pattern…

view full answer...

Answer 8

Based on the dimensions you listed the equalizer you need is the part #TREQE1. This equalizer has 7-3/4 inches between the mounting holes from left to right and 2-7/8 inches vertically.

view full answer...

Answer 9

The only hitch that will work with your 2020 Lexus RX350 F Sport is the Draw-Tite Trailer Hitch item #75540. This hitch is custom fit and bolts to your Lexus with included hardware. This is a class III hitch with a 2" receiver. It has a 4,500…

view full answer...

Answer 10

Currently the Draw-Tite Max-Frame Trailer Hitch Receiver #75540 is the only receiver confirmed to fit your 2022 Lexus RX 350. This receiver is rated for up to 675lbs of tongue weight and 4,500lbs total trailer weight. Be sure to verify your towing…

view full answer...

Answer 11

Starting with the trailer hitch for your 2018 Lexus RX 450h I recommend the Curt Class III Receiver Hitch #C13282 because it allows for an easier installation than the Draw-Tite model that is also available and is made right here in the USA. Unlike…

view full answer...

Answer 12

Since the Curt Hitch part #C13272 installs by simply raising up into position at the rear of your vehicle and then bolting it into place there would be no need for you to remove the rear damper or any body panels to installation. If you wanted to do…

view full answer...