Compatibility of Roadmaster Tow Dolly with 2017 Toyota Highlander XLE with 245/60R18 Tires

Question

Question:

Is the Tow Dolly RM-2001 appropriate to tow a 2017 Toyota Highlander XLE with 245/60R 18 tires. Front GVWR is 2955 lbs

asked by: Tony M

0

Expert Reply:

The Roadmaster Tow Dolly with Electric Brakes # RM-2050-1 has the weight capacity to handle the 2017 Toyota Highlander XLE. The wheel size gives you a 29.6 inch diameter wheel that will require different wheel straps. I recommend using the Bulldog Winch Ratcheting Wheel Tie-Down Strap for Extra-Wide Tire - Vertical Mount - 3,335 lbs # BDW20362.

expert reply by: Jason S

0

Answer 1

I have a couple options for you as the SmartStraps Ratcheting Wheel Net with Snap Hooks #348851 will not fit your 33" tire. The ProGrip Adjustable Wheel Net with Ratchet and Snap Hooks #317-18900 are designed to fit a tire up to…

view full answer...

Answer 2

We have the Bulldog Winch Ratcheting Wheel Tie-Down Strap for Extra-Wide Tire - Vertical Mount - 3,335 lbs #BDW20362 which is very similar to a wheel net and is compatible with diameters up to 37 inches. It is 9 inches wide so it won't fit…

view full answer...

Answer 3

The Bulldog Winch Ratcheting Wheel Tie-Down Strap #BDW20362 measures 92" end to end. When I reached out to my contact at Bulldog Winch he confirmed this but also added that since some of the strap will be used for the ratcheting mechanism…

view full answer...

Answer 4

I have a solution for you, but the straps that come with the Demco Kar Kaddy SS #DM9713045 will not fit on your Jeep Wrangler Rubicon with 34" tires. The Replacement 3-Point Large Wheel Tie-Down Strap for Demco Tow Dollies - Qty 1 #DM03528-93 is…

view full answer...

Answer 5

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 8

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

Hey Chet, It looks like you can use the Bulldog Winch Ratcheting Wheel Tie-Down Strap #BDW20362. This tie down strap can accommodate up to a 37" tire, has a working load limit of 3,335 lbs, and a maximum load limit of 10,000 lbs.

view full answer...

Compatibility of Roadmaster Tow Dolly with 2017 Toyota Highlander XLE with 245/60R18 Tires

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching