Plate mount hitch

Question

Question:

looking for bolt pattern 3by 7 inches 2 5/16

asked by: Fredy

0

Expert Reply:

That's a tough one.

I have attached the couplers that I have that are designed to be plate mounted but they are all 4.5" center to center like part # 3370091558. They all offer the 2 5/16" ball but I can't find anything close to 3" x 7" mounting patterns.

Is it possible that it is an older style that isn't produces any more? I don't know the exact application but if you can't fins anything to match can you drill mounting holes for one like these or is there interference?

expert reply by: Randy B

0

Answer 1

Adjustable trailer couplers are not going to mount to your truck; they will attach to the frame of your trailer. Some of the adjustable couplers, such as the Bulldog Cast Head #BDA2563C0317 come with the mounting hardware to weld onto the frame of…

view full answer...

Answer 2

I do have a solution for you but there have actually never been any custom towing mirrors made for a Nissan Frontier and so I would be surprised if any ever come out for your 2019 Nissan Frontier. Since this is the case I recommend using the K-Source…

view full answer...

Answer 3

I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…

view full answer...

Answer 4

The only differences between the Demco Trailer Coupler #DM14976-52 and #DM88XR are the colors and the mounting bracket design. The part DM14976-52 is silver and has a straight, or no-drop, design with the bottom of the coupler being towards the top…

view full answer...

Answer 5

You will need to get the other bearing number from inside your current hubs before we can pick you out replacement hubs. Most likely the outer bearing you pulled is a LM67048 and the inner you have is a 25580 which would mean that the #8-201-5UC3…

view full answer...

Answer 6

I've attached a dimensional drawing for the Ark XO Drop Down Corner RV Stabilizer Jacks #ARK87FR, which displays the measurements in mm and inches. If you need anything else please let me know and I'd be happy to help.

view full answer...

Answer 7

The Lippert 5,200 lb axle you have has a hub face to hub face of 86.5 inches which is identical to the Dexter #8327816 you referenced, however the 68.5 inch spring seats of your Lippert axle are not identical to the 71.5 inch spring centers of the…

view full answer...

Answer 8

Based on the weight capacity you mentioned seeing on the spec sheet the best option for a leaf spring would be the part #SP-222275 which is for a 5,300 lb axle but is a bit shorter at 24-7/8 inches which is more common on the higher capacity axles.…

view full answer...

Answer 9

That does make sense. We don't have an exact replacement for your application but if you check out the Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles #7685269 you can see that it has 95" hub-face and 80" spring-center…

view full answer...

Answer 10

The equalizer in the Tandem-Axle Trailer Equalizer Kit #AP216 is 11-1/2" on center from the outer spring mounting holes when measuring horizontal separation. One hole will be 6" on center from the equalizer mounting hole center and the…

view full answer...

Answer 11

There isn't a specific distance the hangers have to be for hanger kit #AP216-H238. A good place to start is 30-1/2 inches on center but you would only really know by mocking it up on the trailer before permanently installing the hangers. To…

view full answer...

Plate mount hitch

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching