Replacement Spring Bar for 800 Pound Tongue Weight Curt TruTrack

Question

Question:

Im looking for..part # 17535 For Curtmfg.com tru-track weight distribution hitch. I need One bar, 35-9/16

asked by: Troy J

0

Expert Reply:

We have exactly what you need. It's our part # C17535.

It measures 35-9/16 inches long and is for the 800 pound tongue weight Curt TruTrack part # C17499.

expert reply by: Charles S

0

Answer 1

Hey Paul, I spoke with Curt and they stated that the Replacement Trunnion Spring Bar for Curt TruTrack Weight Distribution System #C17535 would only be compatible with the #C17499. The Curt TruTrack 4P Trailer Mounted Weight Distribution System w/…

view full answer...

Answer 2

It is possible for some spring bars to be interchanged based on their size, but that won't increase a weight distribution system's capacity without adding the appropriate head unit. The replacement spring bars that are rated for 1,200 lbs TW…

view full answer...

Answer 3

The difference between the Curt TruTrack #C17501 and #C17499 are their weight capacities and the #C17501 comes with a 2-5/16" hitch ball already installed, whereas the #C17499 would require you to purchase one and torque it down yourself. The…

view full answer...

Answer 4

In order to use the lighter spring bars #C17535 (sold in quantities of 1) you would also have to replace the head because the different TruTrack systems use different heads. The head you would need is #C17506. For about the same cost as replacing…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The Replacement Spring Bar for Equal-i-zer Weight Distribution Systems #EQ90-02-0699 could potentially work however without knowing what system you currently have I won't be able to say for certain. The easiest way to find out what you need is to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

To replace either of the hitch balls that come with the Curt Deep Drop Adjustable 2-Ball Mount #C49NR you need the Curt Dual Ball Attachment #C69NR. The individual hitch balls aren't replaceable so you have the get the platform piece, but you…

view full answer...

Answer 10

The Curt TruTrack Weight Distribution System part #C17500 which is rated for up to 10,000 lbs gross trailer weight and 1,000 lbs tongue weight would work but it wouldn't perform as well as the Curt TruTrack Weight Distribution System part #C17499…

view full answer...

Replacement Spring Bar for 800 Pound Tongue Weight Curt TruTrack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching