Replacement Clamp-On Brackets for Blue Ox SwayPro Weight Distribution Hitch

Question

Question:

I have the blue ox sway pro w/750 lb tongue weight spring bars. I need a set of replacement spring bar chain u bolts. Can you help?

asked by: John V

0

Expert Reply:

I believe we have what you are referring to, though none of the Blue Ox SwayPro Weight Distribution Hitches, including the 7,500/750 lb model # BXW0750 have U-bolts.

What it sounds like you are referencing is the clamp-on lift brackets, and we do carry replacements, the Clamp-On Lift Brackets for Blue Ox SwayPro Weight Distribution Systems # BXW4010.

I've added a link to a video review for you to check out as well.

expert reply by: Kyle S

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 4

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. Measuring is not required if you just take a look at your coupler and see where it attaches to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Donald, the best Blue Ox weight distribution would be the pat #BXW0550 as it has a perfect tongue weight range for your 450 lb tongue weight trailer.

view full answer...

Answer 7

Hey Frank, so the Blue Ox SwayPro weight distribution system you'd want is the part #BXW0750 which has a tongue weight range that matches what a 6,000 lb trailer would have.

view full answer...

Answer 8

Yes, you can absolutely drill holes in your trailer tongue to install the 10,000 lb capacity Buyers Products Straight Tongue Trailer Coupler #3370091560. This is a pretty common occurrence due to the various bolt hole patterns of straight tongue…

view full answer...

Answer 9

We do offer the Blue Ox SwayPro Weight Distribution Systems for underslung trailer couplers; part #BXW0553 for 6K, part #BXW0753 for 8K, part #BXW1003 for 10K, and part #BXW1503 for 15K. Unfortunately, they aren't offered with 2-1/2" shanks…

view full answer...

Answer 10

You certainly can upgrade your Blue Ox Sway Pro weight distribution system part #BXW0550 by replacing the spring bars with part #BXW4007. All of the Sway Pro systems use the same weight distribution head so they will fit. The 1,000 lbs TW replacement…

view full answer...

Answer 11

The Blue Ox SwayPro Weight Distribution System part #BXW0750 which is rated for 550 lbs - 750 lbs is what I recommend for a trailer with 550 lb tongue weight and around 100 lbs in the truck bed. In regards to choosing the best weight distribution…

view full answer...

Replacement Clamp-On Brackets for Blue Ox SwayPro Weight Distribution Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching