Will Tow Hooks Need to be Removed to Install Front Hitch in 2016 Jeep Grand Cherokee

Question

Question:

My GC has tow hooks which extend thru the front fascia see pictures - so the tow hooks should not have to be removed for the Curt front hitch, correct? Also, should I order model with or without tow hooks?

asked by: Howie H

0

Expert Reply:

To answer your question about which front mounted hitch option you should order for your 2016 Jeep Grand Cherokee, there is actually only one that fits, the Curt Front Mount Trailer Hitch Receiver # C31033.

That said, your tow hooks do need to be removed in order to install this hitch and your tow hooks do need to be bolted on (as opposed to welded) to install. I have added a link to the installation instructions for you to check out as well.

expert reply by: Kyle S

0

click to enlarge

Answer 1

The vertical load limit for the Curt front hitch that fits your 2018 Jeep Wrangler item #C31433 is 525 lbs. The vertical load rating for a front mounted hitch is the same thing as tongue weight rating for a rear trailer hitch. I've included a…

view full answer...

Answer 2

Curt front mount trailer hitch #C31033 will fit your 2013 Jeep Grand Cherokee as long as the vehicle does not have factory tow hooks. There are no options if it does have factory tow hooks. Though we have heard of at least one customer who had a…

view full answer...

Answer 3

The Curt Front Mount Trailer Hitch Receiver item #31433 you referenced is for the 75th Anniversary Edition Jeep Wrangler that came out in 2016 it also fits the hard rock editions. These models have the hard rock bumper which changed the mounting…

view full answer...

Answer 4

The Curt Front Mount Trailer Hitch Receiver part #C31033 is a confirmed fit for your 2017 Dodge Durango as long as you do not have the factory tow hooks. This hitch has a 3,000 lb gross trailer weight (GTW) capacity and a 300 lb tongue weight (TW)…

view full answer...

Answer 5

To install front mount trailer hitch #C31033 you may need to enlarge an access hole on the frame under the vehicle by drilling, filing, or using a rotary tool. There is also an underbody panel that needs to be removed for installation. It can either…

view full answer...

Answer 6

I spoke with the manufacturer and you move lines to fit the hitch in but there is no relocation or changing of transmission cooler lines to get part #306-X7904 installed on your 2017 F-350.

view full answer...

Answer 7

Any time you are towing a trailer that has a fully loaded weigh that is over 50 percent of the vehicle's gross weight, a weight distribution system is recommended. If your vehicle weighs less than 6,000 lbs, a weight distribution system and…

view full answer...

Answer 8

I do have a snow plow that is a confimed fit for your 2013 Jeep Grand Cherokee Overlander. It will require a 2 inch front hitch receiver, and I recommend the Curt Front Mount Trailer Hitch Receiver 2", #C31033. Drilling may be required for this…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...