Can Cover on 6" Diameter Furrion Marine Speaker be Removed

Question

Question:

How do you get the cover of the 5 inch furion marine speaker off?

asked by: Eric R

0

Expert Reply:

The cover for the Furrion Marine Speaker # FMS5B isn't actually able to be removed. I reached out to my contact at Furrion who confirmed this for me.

If you're having issues with this speaker then I'd first check the wiring connections and then possibly swapping this with another speaker that does work just to confirm whether the wiring or the speaker needs to be replaced.

expert reply by: Jon G

0

Answer 1

The replacement motor for the Greystone RV Range Hood with Light - 12V - 24" Wide - Black Item #324-000087 is the Replacement 12-Volt DC Fan Motor for Ventline RV Range Hood Item #BVD0218-00. If you also need to replace the fan blade the correct…

view full answer...

Answer 2

The best match we have for your hydraulic bed cradle slide-out system is the Lippert Replacement Hydraulic Cylinder for RV Slide-Out part #LC339031 which has an extended length of 63" and a retracted length of 39" which you can see from the…

view full answer...

Answer 3

In order to hook up a Furrion RV Stereo part #DV3300SBL to a TV you will need a set of RCA cables, the RCA Cables part #DG52485VP for example are 6' long. The RCA cables will then plug into the RCA ports on the back of the stereo and then on the…

view full answer...

Answer 4

According to Dometic, the company that purchased Atwood, the MPD 93755 is an instruction booklet. To get particulars about where the element is located, I'd need the model number of the heater itself. The number should be printed or stamped onto…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Answer 9

We do have that exact lube with the Aqua Lube part #RM-400-011-30.

view full answer...

Answer 10

In regards to the Roadmaster Exact Center Steering Stabilizer part #RM47MR, the stabilizer installs on the front of the steering arm pointed down. I have attached a photo of this below. If this wasn't what you were looking for, please just let me…

view full answer...

Answer 11

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Answer 12

When installing the Roadmaster Split Bushing for Anti-Sway Bar part #RM-205249-10, I recommend using the Mystik JT-6 part #L74FR. This is a marine grease that is very similar to what comes with their sway bars.

view full answer...

Can Cover on 6" Diameter Furrion Marine Speaker be Removed

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching