Wireless Camper Shell Lock for SnugTop Camper Shell

Question

Question:

Do you have a wireless lock kit for a 2016 Snug top shell which is on a 2016 ram?

asked by: Rick L

0

Expert Reply:

Yes, we have the Pop & Lock Power Lock Conversion Kit # PAL9772 which fits the SnugTop camper shell you have on your 2016 Ram 2500 and wires to the power locks of the truck which allows it to easily lock and unlock as needed with your key fob.

expert reply by: Jameson C

0

Answer 1

The MaxxFan Deluxe Roof Vent, #MA00-07500K probably has a faulty operator mechanism or lift motor. The correct replacement part number for Replacement Operator Mechanism for MaxxAir MaxxFan, is #MA10-20281K-1AF. The Replacement Lift Motor for Maxx…

view full answer...

Answer 2

If your 7-way harness' locking tab broke you could replace the wiring harness if you wanted to or you can simply snug it up with a zip tie. I suggest that you disconnect the plug from the 7-way, clean the contacts as needed, apply a…

view full answer...

Answer 3

Yes, the Pop & Lock Power Lock Conversion Kit for Truck Caps and Hard Tonneau Covers part #PAL9772 or part #PAL9555 will work on the Leer 100XQ Truck Caps because it uses a cable latching mechanism and the handle is not riveted on.

view full answer...

Answer 4

I checked with Pop & Lock for you and there is a system that they have confirmed will work with 2011 and newer Leer 100XL, Leer 100XQ, and Leer 700: - Pop & Lock Power Lock Conversion Kit for Truck Caps and Hard Tonneau Covers…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 7

Chad, the etrailer Trailer Hitch Receiver #e54KR you're looking at is not going to work with your 2023 Subaru Outback Wilderness; Instead, you'd want to use the etrailer Trailer Hitch Receiver #e25TR. This hitch is virtually the exact…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...