Does Edge CTS3 Fit 2018 Ram 2500 Diesel

Question

Question:

Is this compatible with a 2018 Ram 2500, 6.7 Cummins?

asked by: George B

0

Expert Reply:

Yes, the Edge Insight CTS3 part # EP54FR is compatible with your 2018 Ram 2500 with a Cummins diesel.

expert reply by: Jameson C

0

Answer 1

The Edge tuners, like the Edge Diesel Evolution CTS3 Performance Tuner, part #EP79YR, when programmed, is locked to that vehicle's VIN. In order to pair it to a different vehicle you first have to reprogram the original vehicle back to…

view full answer...

Answer 2

In regards to the Edge Insight CTS3 Comprehensive Gauge Display part #EP54FR which is a fit for a 2020 GMC Sierra 3500, the following can be monitored for models with the 6.6L Duramax Engine: Accel Pedal Position, Ambient Air Temp, Barometric…

view full answer...

Answer 3

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 4

I am not sure which wire or step of the installation process you are referring to but I will walk you through the entire process below for future reference. In order to install the Edge EZ for Dodge Cummins 5.9L part #EP30203 on your 2003 Dodge Ram…

view full answer...

Answer 5

Performance tuners like Edge's products store a vehicle's original factory tune inside their internal memory. This storage feature allows you to restore the factory tune by reinstalling that original file. The tuners that fit your 2001 Dodge…

view full answer...

Answer 6

The Edge EZ, #EZD1000A comes with a switch that allows you to pick which tune level you want. I attached a picture I took from the install instructions that shows where the switch selector is for you to check out.

view full answer...

Answer 7

As long as your 2004 Dodge Ram 3500 has the 5.9L diesel engine and is in good running condition, you can certainly use the Edge EZ programmer, #EP30204, to help boost your horsepower and torque as well as improve your fuel economy. With the EZ you…

view full answer...

Answer 8

Dexter Nev-R-Lube Bearings such as the 50MM #31-71-3 referenced in your question do not have a specific maintenance or replacement schedule. These are pre-lubricated at the factory, which will make it resistant to contamination, and sealed for life…

view full answer...

Answer 9

We went ahead and took a look for you at the Dexter Bearing, 42MM Nev-R-Lube 42MM x 76MM x 39MM #31-73-3. I can tell you that what we have is indeed a Timken product that is made in the USA; it says so right on the bearing. I have added a link below…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Does Edge CTS3 Fit 2018 Ram 2500 Diesel

Product Page this Question was Asked From

Continue Researching