Replacement Anti-Rattle Hitch Pin Needed for the Folding 24x62 etrailer Cargo Carrier

Question

Question:

I lost my anti rattle pin for the the eTrailer rack e98872. I’m having trouble finding a replacement on line. How do go about getting a replacement?

asked by: James C

0

Expert Reply:

The anti-rattle pin for the Folding 24x62 etrailer Cargo Carrier for 2" Hitches # e98872 can be replaced with the Threaded Anti-Rattle Hitch Pin and Clip # e98910 or upgraded to the Lock for etrailer Cargo Carriers # e99047.

expert reply by: Jon G

0

Answer 1

Yes, you would be able to replace pin at the fold up shank in the 24x60 etrailer Cargo Carrier for 2" Hitches - Steel - Tilting - Folding - 500 lbs, part #e98874, with the Threaded Anti-Rattle Hitch Pin Lock for etrailer Cargo Carriers - Keyed…

view full answer...

Answer 2

This isn't completely uncommon since the receiver tubes on the Toyota factory hitches are a little bit thicker than what most other hitches are for some reason. With that said, you would be able to use the #e98911 on your etrailer Cargo Carrier…

view full answer...

Answer 3

This sometimes happens and the best solution is to get the locking anti rattle bolt #e99047. It is a lot longer and can be locked so it's an upgrade for sure. This will work with your tilting cargo carrier #e98874 and other etrailer products as…

view full answer...

Answer 4

We sure do! To replace the anti-rattle hitch pin for your 24x60 etrailer Cargo Carrier #e98874 I recommend using the Threaded Anti-Rattle Pin Lock #e99047 so you take out any play in the cargo carrier moving in the receiver, plus it secures your…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

I have a set that will work however your 2023 Chevy Suburban's owners manual says not to use tire chains because of clearance issues on the inner part of the tires. You can find this information on page 370. To avoid damaging brake lines and…

view full answer...

Answer 9

The 24x60 Curt Cargo Carrier for 2" Hitches, part #C18152, and the 24x60 Reese Cargo Carrier for 2" Hitches, part #63153, are extremely similar. In fact, in terms of the specs that you mentioned, neither stands above the other. I only…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

We do indeed have the exact tail light kit you need for the 24x60 Reese Cargo Carrier #63153: - Light Kit for Draw-Tite, Tow Ready, and Rola Railed Cargo Carriers #20174 This light kit is a confirmed fit for the Reese cargo carrier so it is exactly…

view full answer...

Replacement Anti-Rattle Hitch Pin Needed for the Folding 24x62 etrailer Cargo Carrier

Products Referenced in This Question

Featured Help Information

Miscellaneous Media

Continue Researching