What Tool For Tightening Bolt on Phoenix USA PXQ2010 Wheel Center Cap

Question

Question:

Recently purchased Phoenix USA Wheel Center Cap - 6-1/2inch Axle Diameter - Center Hole Mount - Right Thread - Rear Item # PXQ2010. What tool/wrench should I purchase to thoroughly tighten the center outside bolt?

asked by: Diane F

0

Expert Reply:

The correct installation tool for the Phoenix USA # PXQ2010 Wheel Center Cap is part # PHX54FR.

expert reply by: Mike L

0

Answer 1

The replacement Lippert Horizontal Power Unit Hydraulic Leveling kit #LC56FR has a 7 quart capacity. This is specifically for the Lippert Towable Level-Up system.

view full answer...

Answer 2

You will need either the Phoenix USA Rear Wheel Center Cap Right Hand Thread #PXQ2010XL or Left Hand Thread #PXQ2010L if you have a 6-1/2" wide hub. Otherwise you will need the Right Hand Thread #PXQ2020 or Left Hand Thread #PXQ2020L if you have…

view full answer...

Answer 3

The Phoenix USA Wheel Center Cap part #PXQ2010 has right hand threads (threads run clockwise) but that does not mean there is a left and right hand cap. You will need to check the bracket of your existing cap to see if there is a L at the end of…

view full answer...

Answer 4

Thank you for the picture. It looks like you have a Fastec Industrial Corporation (FIC) latch. The correct replacement key would be the Replacement Key for FIC Locks - HF315 #GL54FR.

view full answer...

Answer 5

While I cannot lookup exactly what your 2022 Tiffin Allegro Bus 45OPP came with, based on videos and images I could find it appears you have the Phoenix USA Rear Wheel Center Cap #PXPH1764 used with your aluminum 22.5" wheels. You can verify…

view full answer...

Answer 6

Since your bracket and center bolt piece is damaged, I recommend to use the Phoenix USA Wheel Center Cap - 6-1/2" Axle Diameter part #PXQ2010L which comes with the replacement left hand threaded center bolt and bracket. The OEM replacement part…

view full answer...

Answer 7

I have a possible solution for you, but the Replacement Phoenix USA Rear Wheel Center Cap #PXPH1764 is actually designed to be used on 10 lug applications, not 8 lug. It sounds like Replacement Phoenix USA Rear Wheel Center Cap - 6-1/2" or…

view full answer...

Answer 8

The closest cap we have that matches your measurement is the Replacement Phoenix USA Rear Wheel Center Cap - 6-1/2" or 8-1/4" Hub Diameter #PXPH1764. This comes with a 6-1/2 center cap requirement. It is also made specifically for a 10-bolt…

view full answer...

Answer 9

I spoke to my contact at Phoenix USA and he told me the correct part for your 2007 Winnebago Tour 40TD Motorhome is the Replacement Right Thread Mounting Bracket for Phoenix USA Wheel Center Caps for 8-1/4" Axles #PHX67FR.

view full answer...

Answer 10

While we don't carry the 10 cubic foot Furrion RV fridge I think I have a great solution for you to keep the doors shut when travelling with the Everchill 12-Volt RV Fridge Door Latch #324-000149. Once installed this will easily hold the doors…

view full answer...