Is the Bracket for the Rear Hub Cover Bolt on 2007 Winnebago Tour 40TD Motorhome

Question

Question:

I have a 2007 Winnebago tour 40td class A motorhome it is on a freightliner chassis. I need the bracket for the rear hub cover bolt where it screws into. Mine is stripped. RH thread. The bracket is shown to come with your hub covers. Can you get me just the bracket?

asked by: Robert R

1

Helpful Expert Reply:

I spoke to my contact at Phoenix USA and he told me the correct part for your 2007 Winnebago Tour 40TD Motorhome is the Replacement Right Thread Mounting Bracket for Phoenix USA Wheel Center Caps for 8-1/4" Axles # PHX67FR.

expert reply by: Thomas M

1

Robert R.

11/12/2021

How do I order that part?

Reply

Les D.

11/16/2021

Just go to the product page I have linked below and add that item to your cart. If you prefer a more personal touch you can call our Customer Service Team at 1-800-298-1624.

Reply

Answer 1

The Phoenix USA #PXQ2020XL wheel center cap isn't vehicle specific. If the rear wheels on your 1999 Newmar Dutch Star Spartan motorhome has a 8-1/4 inch diameter hub and a 10 on 285mm wheel bolt pattern, then the center cap would be compatible.…

view full answer...

Answer 2

The Phoenix USA Rear Wheel Center Cap, part #PXQ1020L, fits 8-1/4" hubs and 8 on 275mm bolt patterns. If these match the specs on your rim, this will fit. It looks like there are several bolt patterns available for the 22.5" Alcoa rims. If…

view full answer...

Answer 3

The Phoenix USA Wheel Center Cap part #PXQ1009 which is for a 6-1/2" diameter axle or the Phoenix USA Wheel Center Cap part #PXQ1020 which is for a 8-1/4" diameter axle already comes with the bolt and bracket that is needed but these are…

view full answer...

Answer 4

Even though most threads on bolts use right-handed bolts/nuts, some special scenarios warrant a left-handed thread. When wheel accessories like the Phoenix USA Rear Wheel Center Cap - 8-1/4" Hub Diameter - Center Hole Mount - Left Thread…

view full answer...

Answer 5

The Phoenix USA Wheel Center Cap part #PXPH1843 is a replacement for the Phoenix USA Wheel Center Cap part #PXQ1009 which is for a 6-1/2" diameter axle or the Phoenix USA Wheel Center Cap part #PXQ1020 which is for a 8-1/4" diameter axle.…

view full answer...

Answer 6

I have a possible solution for you, but the Replacement Phoenix USA Rear Wheel Center Cap #PXPH1764 is actually designed to be used on 10 lug applications, not 8 lug. It sounds like Replacement Phoenix USA Rear Wheel Center Cap - 6-1/2" or…

view full answer...

Answer 7

The Phoenix USA Rear Wheel Center Cap - 8-1/4" Hub Diameter - Center Hole Mount - Right Thread #PXQ2020XL fits the rear motorhome wheels that has a hub diameter of 8-1/4 inches and a bolt pattern of 10 on 285 millimeters. When it comes to the…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

While I cannot lookup exactly what your 2022 Tiffin Allegro Bus 45OPP came with, based on videos and images I could find it appears you have the Phoenix USA Rear Wheel Center Cap #PXPH1764 used with your aluminum 22.5" wheels. You can verify…

view full answer...

Answer 10

The Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR is a single zone 3 wire thermostat like the one you are describing. I have attached the wiring diagram for this thermostat and the control box below for your reference.

view full answer...