Replacement Truxedo Lo Pro Tarp for a 2005 dodge 3500 Long Bed Pickup

Question

Question:

I need the order # of a tarp that fits an 8foot pickup bed

asked by: Wanda H

0

Expert Reply:

The correct replacement tarp for a 2005 Ram 3500 with an 8 foot bed and a TruXedo Lo Pro Soft Roll-up Tonneau Cover part # TX548101 is the Replacement Cover part # TX548101-COVER.

If this is not the cover you have please let my know which type you do have and I will be happy to help you find the cover.

expert reply by: Randy B

0

Answer 1

I spoke with TruXedo and they were able to identify the cover you have as the TruXedo Original Tonneau Cover based on the side rail shape therefore the correct replacement tarp for you is the Replacement Tarp for TruXedo Original Tonneau Cover part…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hello Cory. I can definitely point you in the right direction, but there is not a B&amp;W Companion option that will fit into a round gooseneck ball hole. As you said, the B&amp;W Companion hitch is only compatible with the…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that&#39;s going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn&#39;t fit their factory 7-way as well. I&#39;ve attached an article to help if you have one of the 7-way or 6-way round…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…

view full answer...

Answer 10

The OEM prep package consists of 4 &quot;pucks&quot; in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The…

view full answer...

Answer 11

The correct landing pad to go with the Tracks part #Y01127 is the Landing Pad 1 part #Y00221. Then for control towers you would need part #Y8890027 for individual towers, and then for 48 inch crossbars part #Y8810021.

view full answer...

Answer 12

Thank you for the photos! It looks like you have an older Yakima system but we do have the Replacement Yakima Control Tower for Factory-installed Tracks #Y8890027 that will fit. This is sold in a quantity of 1 so be sure to change that to what…

view full answer...

Replacement Truxedo Lo Pro Tarp for a 2005 dodge 3500 Long Bed Pickup

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching