Landing Pad Recommendation for Yakima Roof Tracks Y01127 for Installing 48 inch Round Crossbars

Question

Question:

Hello, I recently purchased a Snugtop camper shell with Yakima tracks installed Y01127 I would like to install four Yakima Control Towers and two 48foot round load bars. My question is, which Landing Pad feet there are numerous models, all numbered are compatible with the Yakima tracks linked above? Thank you,

asked by: Stephen

0

Expert Reply:

The correct landing pad to go with the Tracks part # Y01127 is the Landing Pad 1 part # Y00221. Then for control towers you would need part # Y8890027 for individual towers, and then for 48 inch crossbars part # Y8810021.

expert reply by: Jameson C

0

Answer 1

If you have the Yakima Skyline or Control Towers then you can use the Landing Pad 1 for Yakima SkyLine and Control Towers part #Y00221 to mount them into tracks/channels like those found on select Retrax Tonneau Covers.

view full answer...

Answer 2

Yes, the TS (T-Slot) Rails for Truck Hero Elevate Rack System part #TH85FR is a universal track system that works with most inside the bed rail mounted tonneau covers. The tracks will then accept pretty much any track mounted accessory. In order to…

view full answer...

Answer 3

Yes, the Rhino-Rack Quick Mount Legs part #RRRLT600 should work just fine with the TS (T-Slot) Rails for Truck Hero Elevate Rack System part #TH65FR.

view full answer...

Answer 4

You are correct, it is the Yakima Landing Pad 1 part #Y00221 that is compatible with the Truxedo Elevate TS rails.

view full answer...

Answer 5

The Rhino-Rack RTC-Style Roof Rack Tracks will work with the Camper shell to give you the compatible tracks. There are different lengths available and you can cut them down if needed: Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/4" Long…

view full answer...

Answer 6

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 7

You can use the Yakima 54" Tracks for Roof Racks #Y01127 without adding anything underneath. As far as protection, there is a plastic piece that will go in between the rail and the roof, so you don't have to worry about it damaging your…

view full answer...

Answer 8

You're in a tough spot as Thule has basically phased out your entire roof rack setup from the feet, to the bars, and the fit kit. I wish I had something I could offer that was simple and easy but based on your situation I would go with option 4…

view full answer...

Answer 9

Hey Gary, so the Yakima 54" Tracks for Roof Racks #Y26RR that you referenced are compatible with your setup as they provide the standard dimension roof tracks that your Sherpa Crows Nest was designed to fit. With that said the correct T-bolt…

view full answer...

Answer 10

Yes most of the T@G campers I have seen use the Yakima 54" Tracks for Roof Racks part #Y01127 base tracks. You can get evrything you need in one kit with the Yakima HardTop SL Roof Rack - 60" CoreBar Crossbars - 54" Tracks part #Y01618…

view full answer...

Answer 11

The correct 54" Yakima Tracks for a Camper Shell is part #Y26RR which will allow you to use any standard track mounted roof rack. The other options you listed, part #Y01127 and part #Y64MR are for metal roofs and ladder racks respectively. Since…

view full answer...

Answer 12

Yes, the 63" Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount part #RTC16 can be cut down to the size you need as long as you cut them perfectly straight to allow the end caps to go back on because at this time we do not carry them as a…

view full answer...

Landing Pad Recommendation for Yakima Roof Tracks Y01127 for Installing 48 inch Round Crossbars

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching