Items Needed to Pull a Bushwacker Plus Camper with a 2014 Nissan Murano

Question

Question:

Hi, I have a 2014 Murano with only a hitch installed no wiring for lights. I am considering buying a Bushwacker Plus which has electric brakes. Bushwacker empty weight is 1900 pounds, GW 3000 and the Mo is rated at 3500 towing. The installed hitch is OK. What do you suggest for a wiring kit and electric brake controller. I like the looks of the wireless controller. Thanks

asked by: Edwin T

1

Helpful Expert Reply:

We can get you set up. If the hitch came factory with your Murano it will be rated up to the 3500 lb. tow capactiy of the vehicle so you're good there.

You need a wiring kit and I recommend the Tekonsha T-One Vehicle Wiring Harness part # 118653 paired with part # ETBC7L Which will give you a working 7-way to pluf in the trailer this will allow the lights and the power to get to the plug.

Once installed the Curt Echo Wireless Trailer Brake Controller part # C51180 will fill the bill for your wireless controller. It will operate directly through your smartphone.

A ball mount kit like the etrailer Ball Mount Kit part # 989900 will round out the items you will need.

I have linked videos on these items for you to check out most importantly the installation of the wiring on your 2014 Murano. Happy Camping!

expert reply by: Randy B

1

Answer 1

The Reese Pro Round Bar Weight Distribution part #RE34FR only comes with a 2-5/16" hitch ball but you can purchase a 2" and swap it out yourself using the 2" Hitch Ball part #A-90. If you don't have the tools to swap it out just…

view full answer...

Answer 2

The 2021 Kia Tellurides all come with the factory tow package port that the Curt T-Connector Vehicle Wiring Harness part #CU94FR plugs into. It does not have to come equipped with the factory tow package per se. It's a direct plug-in fit for all…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

I can certainly help you out with using your 2022 Subaru Outback Wilderness to tow a trailer. You will want to use a trailer hitch receiver like Curt Trailer Hitch Receiver 2" #C67JR which offers a simple no-drill installation. A ball-mount will…

view full answer...

Answer 5

We do have everything you need to install a 7-Way on your 2020 Subaru Outback Wagon so you can utilize a brake controller but we need to start off by making sure you have a 4-Way for the basic trailer lighting functions. If you don't already have…

view full answer...

Answer 6

Based on the picture you provided I believe you have the SAE solar plug port on your Braxton Creek Bushwhacker Plus 17BH so you should have no issues plugging your Go Power DuraLite Portable Solar Panel with Digital Solar Controller #GP66FR in using…

view full answer...

Answer 7

The best way to tell whether or not your 2015 Mazda CX-5 came with LED tailights would be to contact the manufacturer with your VIN. They would be able to tell you without a doubt whether or not your vehicle has LED taillights. The other way would be…

view full answer...

Answer 8

If you can't place any weight on the trailer in any way that limits a lot of the options. Basically you'd have to decide if you could fit in in the interior or use a bunk like part #CC-255 as a platform on the tongue of the trailer. This is…

view full answer...

Items Needed to Pull a Bushwacker Plus Camper with a 2014 Nissan Murano

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching