Ball Mount for 3 Inch Trailer Hitch Receiver With the Most Drop

Question

Question:

I am looking for a three inch receiver with a 11 inch drop with a 2-inch ball

asked by: Robert D

0

Expert Reply:

We can get you close to an 11 inch drop, but there isn't a ball mount that fits a 3 inch trailer hitch receiver that has that much drop; the most drop for a ball mount in that large a receiver is 10-5/8 inches, and there are also ball mounts with 10 inches of drop. These are the options for the ball mounts with the most drop for your 3 inch receiver:

- 10-5/8" Drop: Curt Adjustable 2-Ball Channel Mount - 21K # C45928

- 10" Drop: BulletProof Hitches Adjustable 2-Ball Mount for 3" Hitch - 22,000 lbs # HD3010

- 10" Drop: BulletProof Hitches Adjustable 2-Ball Mount for 3" Hitch - 36,000 lbs # ED3010

Each of these ball mounts is a 2-ball mount with a 2" hitch ball and 2-5/16" hitch ball, with the Curt able to tow 10,00 lbs with the 2" ball (and 21,000 with the 2-51/6" ball), while the BulletProof Hitches mount has a 12,000 lb capacity for the 2" ball (and 22,000 lbs or 36,000 lbs for the 2-5/16" ball, depending on the model).

Additionally, one of these ball mounts come with locks, so I highly recommend adding one, the InfiniteRule Hitch Lock for 3" Hitches # 34061074-D. I have also added links to video reviews of each of these ball mounts for you to check out.

expert reply by: Kyle S

0

Answer 1

You can absolutely trust the manufacturer ratings for the ball mounts we have available, regardless of whether or not they feature a solid or hollow shank. Ball mounts and other towing products are typically tested well beyond their actual listed…

view full answer...

Answer 2

The Flash E Series Adjustable 2-Ball Mount, part #FA42-00-2800 will work just fine with a 2x2 inch Class III receiver on your Hummer H2. The Ball Mount has a 8000 lb capacity when used with the 2 inch ball, or 10,000 lbs when used with the 2-5/16…

view full answer...

Answer 3

The 4-stacked receiver shank #325-GH-304 as well as the 2-ball mount #325-GH-031 included with the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 7-1/2" Drop/Rise - 10K, part #325-GH-314 are constructed of heavy duty steel.…

view full answer...

Answer 4

I recommend the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 10" Drop/Rise - 10K item #325-GH-315. This ball mount will give you a wide range of options for drop and extension away from the back of your Ford F-250 Tremor.…

view full answer...

Answer 5

I will start by saying the ARK Extreme Off-Road Ratcheting Trailer Jack w/ Wheel #ORJW1SU will fit frames that are 2" to 6" tall. The bolt hole measurements vary and I included a diagram with everything listed, but the overall dimensions of…

view full answer...

Answer 6

The Curt Pintle Hook with 2-5/16" Ball - 2" Hitches - 12,000 lbs/16,000 lbs, #C48006, is an excellent hitch that allows you to pull a trailer with a lunette ring coupler or a trailer with a standard 2-5/16 inch coupler. This hitch fits into…

view full answer...

Answer 7

There are not many differences between a welded and forged weight distribution shank in regards to practicality. They both pass the same DOT standards and meet the maximum 15,000 lb weight capacity requirement. The forged shanks started to become…

view full answer...

Ball Mount for 3 Inch Trailer Hitch Receiver With the Most Drop

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching