Air Bag and Compressor Kit Recommendation for 2017 GMC Sierra 1500 Denali with Magneride

Question

Question:

I am looking to get a standard duty single-path air compressor set up with bags for my 2017 GMC Sierra Denali 1500. Can you direct me to the correct kit as I believe it has that Magneride rear shocks.

asked by: Josh V

0

Expert Reply:

I checked with AirLift and their only available suspension enhancement that is compatible with your 2017 GMC Sierra 1500 Denali is the AirLift Ride Control Air Helper Springs # AL59565 which then we have the standard duty, single path wireless kit part # AL25980 for a compressor for a setup with a wireless remote or # AL25592 if you prefer a manual gauge and switch.

expert reply by: Jameson C

0

Answer 1

I checked with both Air Lift and Firestone and the only rear air spring suspension upgrade available that is compatible with the MagneRide suspension on your 2018 GMC Sierra Denali with the 6-1/2 foot bed is the Air Lift Ride Control #AL59565. My…

view full answer...

Answer 2

Since your 2018 GMC Sierra 1500 Denali with the 5-1/2' Bed has the factory MagneRide Suspension the only air helper spring kit available is the Air Lift Ride Control Air Helper Springs - Rear Axle #AL59565. This kit offers 2000lbs of load…

view full answer...

Answer 3

I checked with AirLift and their only available suspension enhancement that is compatible with your 2017 GMC Sierra 1500 Denali is the AirLift Ride Control Air Helper Springs #AL59565 . This is a rear axle suspension system that acts in conjunction…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 5

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 6

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching…

view full answer...

Answer 7

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to…

view full answer...

Answer 8

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…

view full answer...

Answer 9

If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…

view full answer...

Answer 10

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference.…

view full answer...

Answer 11

Replacement arms are available for the Roadmaster EZ5 Base Plate Kit #RM-521569-5 for your 2015 Honda Fit with the part #RM-ARMS. When the original base plate brackets and arms were manufactured, they were made as one part. To be sure that the new…

view full answer...

Answer 12

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Air Bag and Compressor Kit Recommendation for 2017 GMC Sierra 1500 Denali with Magneride

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching