Anti-Rattle Hitch Lock Recommendation for etrailer Hitch e98865

Question

Question:

Im needing to know what type of hitch lock size I need.

asked by: Ben

0

Expert Reply:

I like to recommend the anti-rattle hitch lock part # 63232 with hitches like the etrailer part # e98865 that you referenced. This takes out all of the movement of the ball mount in the hitch as well as locks it in place to prevent theft. Check out the review video I attached for more info as well.

expert reply by: Jameson C

0

Answer 1

Sounds like you have a hitch that is set up for a j-pin style of anti-sway.. The rearmost hole on the hitch opening will be a little bit larger and that is the correct hole to use for the hitch pin of your bike rack. Most anti-rattle devices for bike…

view full answer...

Answer 2

One of the newer options we have available is the Reese Amigo, part #PS63604. This is a 59 x 18 inch cargo carrier that is water and weather resistant. This means that if thoroughly soaked for a long time, it won't be fully water proof, but…

view full answer...

Answer 3

If you know the reference number that was printed on the key, we might be able to obtain a replacement key. If you don't know the key number, you best bet would be to drill the lock cylinder out, or use a cut-off wheel on an angle grinder to cut…

view full answer...

Answer 4

The Pro Series part #PS63604 measures 59" x 18-1/2" x 24" and is a great bag. It is water resistant and can be used in your truck bed, your trunk, or on a roof-mounted cargo carrier. It has welded seams to help keep the water out.

view full answer...

Answer 5

I'm not sure which coupler that is, but I can say that a certain amount of rattling is to be expected because of the space needed to allow the ball to turn inside the coupler-especially with an adjustable coupler. With that being said, you can…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

I have a solution for you. You can't convert the Thule T2 Pro XTR 2 Bike Platform Rack #TH23JV to a 2 inch hitch according to my contact at Thule so you will need to use an adapter. I recommend using the Brophy Hitch Reducer 2" to…

view full answer...

Answer 8

Hey Thea, sorry to hear about the B and W Tow n Stow part #BWTS20066BMP not fitting super tight in your hitch. This generally isn't a quality issue though as it can be that the tolerances of the hitch it's installed in are too loose. You…

view full answer...

Anti-Rattle Hitch Lock Recommendation for etrailer Hitch e98865

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching