Does Brophy Ball Mount BX20 Fit Over Combo Bar # D30

Question

Question:

Will this BZ20.-description fit over D30

asked by: Eric M

0

Expert Reply:

Yes, the 2-1/2 inch ball mount part # BZ20 will fit over the 2 inch combo bar part # D30 that you referenced.

expert reply by: Jameson C

0

Answer 1

The Buyers Products Black Receiver Tube #337RT25848B is a receiver tube and not an extension. It will not be able to slide into each other as the tubing is 2"x2" square tubing the entire 4' length. You would be able to connect these…

view full answer...

Answer 2

The Curt Solid Steel, 2" Hitch Bar with Raw Finish - 8" Long #C49537 has a measurement of 2-1/2 inches from the end of the bar to the center of the hitch pin hole. I've attached a video to further assist.

view full answer...

Answer 3

The Brophy Ball Mount #BM20 and the Brophy #BH20 referenced in your question are extremely similar to each other. They are both designed for 2 inch trailer hitch receivers, have a 10,000 pound towing weight capacity, feature a long, 13-1/4 inch shank…

view full answer...

Answer 4

Reducer sleeves like the #BWRHXA2182 are often used for accessories, but it is perfectly acceptable to use them for towing as well. As long as it is just a reducer, and not a reducer and extension, it will not impact your towing capacity. If you got…

view full answer...

Answer 5

The Buyers Products Black Receiver Tube #337RT25848B that you referenced weighs 27 lbs. It has a max trailer weight capacity of 20,000 lbs.

view full answer...

Answer 6

The outside dimension of the tubing that the #337RT25848B Buyer's Products Black 2 Inch Receiver Tube is constructed of is 2-1/2 inches, so theoretically speaking it would possibly fit in a 2-1/2 inch receiver. However, it will likely be a very…

view full answer...

Answer 7

I went to the warehouse and measured, the wall thickness of the Buyers Products Black Receiver Tube part #337RT25848B is 0.27". This has a maximum gross trailer weight of 20,000 lbs so you will not have any issues using it for your farm…

view full answer...

Answer 8

For welding on the Curt Solid Steel 2" Hitch Bar, part #D30 a general purpose rod like a 7018 is recommended. If you click the provided link, you can see a product description video.

view full answer...

Answer 9

The Curt Solid Steel 2" Hitch Bar with Raw Finish - 12" Long #D30 (manufacturer part number 49530) has measurements with a digital caliper of 2.0015 inches by 2.0130 inches.

view full answer...

Answer 10

Yes, I spoke with my contact at Curt and she informed me that every Curt Solid Steel 2 inch Hitch Bar, #D30, comes pre-drilled with a hitch pin hole. Each one of the #D30 is 12 inches long and would come with the pre-drilled hole.

view full answer...

Answer 11

Currently we go from a 7" Extension/Reducer #e53YR that fits your 2-1/2" receiver to a 24" Extension/Reducer #RP45292. Both of these will reduce the receiver from a 2-1/2" receiver to a 2" receiver. You may consider a Gen-Y…

view full answer...

Answer 12

I have a solution for your tailgate clearance issue but we do not have a 2 1/2" extension that doesn't reduce that is also around the length you are looking for. I recommend going with an extended ball mount. Item #BZ20 is the Brophy Ball…

view full answer...