Replacement Roof Vent Lid for 1982 Holiday Rambler Motorhome

Question

Question:

The roof vents a power but the have a bigger radius on corners the. hammond looks simular were can i get the relacment cap that light can pass such as smoke or frost or clear. I need two vent cap replacement

asked by: John

0

Expert Reply:

The best option we have for a replacement roof vent due to the age of the application is the MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent part # MA00-335002 for smoke or part # MA00-335001 for white. These are universal options that work great to replace the roof vent lid on older vents where an exact replacement may not be available which is the case for your motorhome.

expert reply by: Conner L

0

Answer 1

A lot of trailer lights have 3 wires. One wire for running lights, one wire for turn signal and brake lights, and one wire for ground. Check the back of the light assemblies because it might indicate the functions of the wires. Other lights may only…

view full answer...

Answer 2

Yes, in order to check to see if you have a trailer battery charge line ran on your 2011 Winnebago Motorhome all you will need to do is test the pin on the 7-way in the 1 o'clock position with a circuit tester while the vehicle is running. If you…

view full answer...

Answer 3

I wasn't able to find any dimensions for the Monarch 9074 lens online, so I can't say for certain that the part # 440-154 lens would be the connect replacement but I'd be happy to provide the dimensions of the lens, and you can compare…

view full answer...

Answer 4

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Replacement Roof Vent Lid for 1982 Holiday Rambler Motorhome

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching