Replacement Vent Fan Motor, Blade, Lens Cover and Grease Filter for Ventline P Series Range Hood

Question

Question:

Hi I have a vent hood motor that has CB249-8 I’m looking for fan blade and motor. Also the filters and light cover thanks

asked by: Rocky L

0

Expert Reply:

It sounds like you likely have a Ventline PR-1 (or other P Series) Range Hood. The replacement motor for that hood is part # BVD0278-00 and the fan blade # BCD0311-00. If your grease filter is 8" x 8" you can use part # BCC0246-00. The replacement light cover lens for the P series range is part # BCC0179-00 which is 9-1/2" long x 3" wide.

expert reply by: Erik B

0

Answer 1

Yes, even though your motor has two wires, you can still use the Replacement Fan Motor for Ventline Range Hoods #BVD0278-00. The reason this motor has three wires means it can be used also on two speed motors. Since your motor only has two wires,…

view full answer...

Answer 2

Yes! The Replacement Fan Motor for Ventline Range Hoods part #BVD0278-00 is correct for your Ventline Range Hood PR-4. I was able to confirm this with my contact at Ventline. The replacement process is super easy according to our customers. There are…

view full answer...

Answer 3

My contact at Ventline advised that the replacement fan motor and fan blade parts you need for your model PI-1 range hood are #BVD0278-00 and #BCD0311-00. Part #BVD0278-00 is the 2-speed motor used in current production. Instructions for wiring this…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

Yes, it will! To attach the Thule Caprock Platform Roof Tray item #TH58YE to the roof of your 2024 Subaru Forester Wilderness you will need the Evo Raised Rail Feet item #TH710401.

view full answer...

Answer 6

Hey Sylvia, the diameter of the lock core side of the B and W Coupler Lock part #BW23FR is 1 inch.

view full answer...

Answer 7

I checked with B&W and their Trailer Hitch Receiver Lock for 3" Hitches item #BW23FR doesn't have a maximum capacity listed because it is rated for a shear strength much higher than the capacity of any 3" receiver and ball mount on…

view full answer...

Answer 8

Hey Eugene, the LMX RED grease like part #L11390 is the best option. It's the most heavy duty, waterproof, and is compatible with basically all greases. I would be cautious not to over fill the hub though as it's pretty easy to blow out seals…

view full answer...

Answer 9

While we do have some T-Bolts #RR72XB which will fit into the TS Rails for TruXedo Elevate Rack System #TH65FR. I recommend using the hardware which comes with the Tie-Down Kit #TH52FR since the kit comes with 8 T-Bolts as well as washers and nuts.…

view full answer...

Answer 10

The Firestone Ride-Rite Air Helper Springs #F2609 is the only kit that we have that will fit your 2020 GMC Sierra 1500 Denali with the adaptive ride control. The difference is the bracket design that allows that suspension system to fit without…

view full answer...