Correct Replacement Lid for MaxxAir MaxxFan Plus 4951K

Question

Question:

Vent cover for maxxfan 4951 ks

asked by: Joyce F

0

Expert Reply:

The correct replacement lid for a MaxxAir MaxxFan Plus 4951K/4951KS is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part # MA10A40009K for smoke or part # MA10A40002K for white.

expert reply by: Conner L

0

Answer 1

To determine the correct cover, you will need to measure the vent opening. The most common openings are 14 1/4" x 14 1/4", and have vents that are 14" x 14". After you make your measurements, you will need to determine what type…

view full answer...

Answer 2

The correct replacement lid/dome for a MaxxFan* 4751KS is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part #MA10A40009K for black or part #MA10A40002K for white.

view full answer...

Answer 3

The #MA10A40002K is only designed to fit on a MaxxFan or MaxxFan Plus Model so you would instead need the Replacement Rain Shield for MaxxFan Deluxe Roof Vent - Smoke #MA05-30520 or #MA05-30510 (white) to replace your MaxxFan Deluxe lid. If you also…

view full answer...

Answer 4

In order for a vent fan to have both an intake and exhaust feature it will need to have a reversible motor. The MaxxAir Mini Deluxe Trailer Roof Vents like part #MA00-03801 for white or part #MA00-03851 for black don't have reversible motors.…

view full answer...

Answer 5

The MaxxAir FanMate vent cover Item #MA00-955001 is going to be just a little taller but the louvred end tapers in and it does not come with the screen which is Item #MA00-955202. 25" long x 18-1/8" wide x 10-1/4" tall. The MaxxAir II…

view full answer...

Answer 6

For the MaxxFan 4401K roof vent the correct lid is the part #MA10A40009K.

view full answer...

Answer 7

The correct replacement roof vent lid you need for the MaxxAir roof vent you have in your RV is the part #MA10A40009K.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 11

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 12

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Correct Replacement Lid for MaxxAir MaxxFan Plus 4951K

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching