Will the Curt Echo Work on a 2019 F-350 With a Factory Brake Controller?

Question

Question:

Will this brake controller work on a 2019 F350 super duty with the factory installed controller in the dash?

asked by: Thomas W

0

Expert Reply:

The Curt Echo PART # C51180 works with a factory brake controller. The Echo needs the 12 volt power source from a 7-way plug. The Echo will override the factory system.

expert reply by: Clayton O

0

Answer 1

Yes, the Tekonsha Prodigy P3 Trailer Brake Controller part #90195 will work on a 2021 GMC Sierra 1500 with factory integrated brake controller. That said you'd have to bypass the factory brake controller which usually entails some splicing. It…

view full answer...

Answer 2

You can use the Curt Echo Brake Controller #C51180 on your 2015 Ram 2500 with a factory brake controller. You will not need to disconnect the factory controller in order for this wireless brake controller to work. The Echo will be much simple to use,…

view full answer...

Answer 3

Yes, the 7-Way Trailer Adapter for Towing Trailers with LED Lights #C57003 can be used with a wireless brake controller like the #C51180. Use of the adapter will not interfere with the functionality of the brake controller.

view full answer...

Answer 4

Yes, the Curt Echo Mobile Trailer Brake Controller part #C51180 will work with a factory brake controller. The Curt Echo will actually override the factory brake controller so you don't have to worry about disconnecting anything either.

view full answer...

Answer 5

I do have an option for your friend but there is going to be some issues bypassing the factory brake controller on a 2019 Chevrolet Silverado 2500 with a conventional brake controller due to the factory computer. However, we have not yet had the…

view full answer...

Answer 6

The Curt Echo #C51180 works differently from a normal brake controller since it is wireless. In order to activate your trailer brakes, the Echo needs to detect that both the left and right brake lights are illuminated and that the vehicle is…

view full answer...

Answer 7

The factory trailer brake controllers are not good options for trailers with electric over hydraulic brakes. There are adapters that you can use to be made compatible, the HydraStar Electric Over Hydraulic Actuator Adapter Module part #HBA-CAM but…

view full answer...

Answer 8

I do have an option for you but I am not aware of anyway to boost power on the factory trailer brake controller. They are rather finicky, especially when used with electric over hydraulic actuators therefore a much better solution would be to bypass…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Will the Curt Echo Work on a 2019 F-350 With a Factory Brake Controller?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching