Brake Controller Installation on 2019 Chevy Silverado 1500 LD

Question

Question:

Is the plug for the 3016 P adapter under the panel? Do I need to remove the panel to get to it?

asked by: Jim

0

Expert Reply:

When installing your Tekonsha Primus IQ # TK90160 with the # 3016 plug in adapter you will need to plug the adapter into the fuse box under the dash board- you should not need to remove and dash panels but you will need to remove the black cover on the box. I have linked installation videos of these parts on similar trucks that you can use as a guide when installing your brake controller.

expert reply by: Erik B

0

Answer 1

The Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040 is going to need some rails to mount to in the bed of your 2020 Chevy Silverado. For this I recommend the Demco Premier Series Above-Bed Base Rails and Custom Installation Kit for 5th…

view full answer...

Answer 2

The Air Lift LoadLifter 5000 Ultimate Plus kits like the part #AL88288 that come with the braided lines actually also come with the nylon air tubing that runs to the inflation valve still which would be where you'd install a union tee like…

view full answer...

Answer 3

Hello Evan, I can help clear this up. The Curt T-Connector #C68JR that you mentioned is for vehicles already equipped with the factory tow package. Meaning there will be an OEM brake controller plug already present under the dash and the brake…

view full answer...

Answer 4

So first of you are going to need the Curt Trailer Hitch Receiver #C23WR which I see you already found. And I do understand your confusion with wiring since you would think since it did not come with the receiver you would not have the factory tow…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

For your 2024 Hyunda Santa Cruz we have the Curt 7-way kit part #C68JR that is a confirmed fit. This installs by plugging into a factory wiring connector on your vehicle which means a really easy install that doesn't require any splicing.

view full answer...

Answer 7

To install a Curt TriFlex NEXT Trailer Brake Controller #C24VV on your 2024 Hyundai Santa Cruz you will need the Curt Custom Wiring Adapter #C77BR. This will provide you with a plug and play connection as long as you have the factory 7-Way #C68JR.

view full answer...

Answer 8

If you're wanting to add a 4-way to power your trailer's signal lights then you need the Curt #CU94FR. If you want to add a 7-way to your 2024 Santa Cruz then you can use the Curt #C68JR. Both of these plug into the tow package you…

view full answer...

Answer 9

Hey Tom, the #ETBC7 kit is exactly what you will need to install a 7-way on your 2004 Toyota Tacoma TRD V6 with the factory 4-flat plug. Here are the answers to your questions: 1. Yes. The kit includes quick splice connectors which make this easy.…

view full answer...

Brake Controller Installation on 2019 Chevy Silverado 1500 LD

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching