Recommended Timbren SES for 2020 Ford F-350

Question

Question:

I carry a lot of heavy stuff in the back of my truck and I want to add some sort of suspension enhancement. I've heard good things about Timbrens. Is there one I can use on my 2020 F-350? Will they help?

asked by: Ron S

0

Expert Reply:

If you're carrying heavy payloads, the Timbren Suspension Enhancement System - Rear Axle # TFR350SDJ are the perfect solution and are a confirmed fit on the 2020 Ford F-350. The great thing about these Timbren SES Springs is that they only engage when the truck is loaded, so they won't effect your unloaded ride quality. The # TFR350SDJ will help lessen the strain on your stock suspension system, and because they work independently they'll help with off-center loads in the truck bed and reduce body roll when cornering or swerving. These also offer a no-drill installation, so they're an easy to install option for your F-350.

I've linked a video that shows how these work that you may want to have a look at, as well.

expert reply by: Erik B

0

Answer 1

The U-shaped shims of the Timbren Suspension Enhancement System #TFR350SDJ are designed to help provide a flat mounting surface for the bracket and help stabilize it from left to right. If there's any way you can get the dealer to track them down…

view full answer...

Answer 2

They sure do! I have verified for you that the following Timbren system does fit your 2022 Ford F-350 Super Duty, both the long bed and short bed, and both 2WD and 4WD: - Timbren Suspension Enhancement System #TFR350SDJ The Timbren Suspension…

view full answer...

Answer 3

For the best Timbren rear-axle setup for your 2022 Ford F-350 4x4 for towing a 5th wheel trailer with a 2,800 pound pin weight, I recommend the Timbren Suspension Enhancement System - Rear Axle #TFR350SDJ. The reason why this kit is the best for your…

view full answer...

Answer 4

Yes, the Timbren Suspension Enhancement System #TFR350SDJ includes two 1/2" spacers. If you need additional spacers, or a larger size, the 1" #A25723-90AH00 and 1/2" #TA25722-90P00 are also available separately.

view full answer...

Answer 5

The Timbren suspension enhancement I recommend for your 2020 Ford F-350 Super Duty is the Timbren Suspension Enhancement System - Rear Axle #TFR350SDJ. These are the correct rear enhancement, as the other option, part #TFRTT350J, is for service…

view full answer...

Answer 6

Late model trucks are usually raked so they're an inch or two taller at the rear axle than the front to compensate for a load in the bed or the tongue weight of a trailer, so typically a leveling kit will raise the front to the same height as the…

view full answer...

Answer 7

I recommend the Timbren Suspension Enhancement System - Rear Axle part #TFR350SDJ for the 2020 Ford F-350 Super Duty with 4 wheel drive. The Timbrens will do a wonderful job of keeping the load level and fixing the rear sag. They also act a shock…

view full answer...

Answer 8

The best Timbren Suspension Enhancement System for your 2020 Ford F-350 is the Timbren #TFR350SDJ because they were designed with recreational towing in mind, as opposed to the kits which are meant to be used with more heavy-duty work trucks that…

view full answer...

Answer 9

The Timbren #TFR250SDJ and the #TFR350SDJ that you referenced use the same bracket so the overall height difference is what you mentioned of 7-9/16 inches for the taller 350 and 6-7/8 for the shorter 250.

view full answer...

Answer 10

For your 2021 Ford F-350 Super Duty I recommend the Timbren Suspension Enhancement System - Rear Axle #TFR350SDJ. These have an 8,600 lb capacity and help with vehicle sag while increasing stability. The springs work independently so they help…

view full answer...

Answer 11

The only difference between the Timbren Suspension Enhancement System part #TFR250SDJ which is for a Ford F-250 and the Timbren Suspension Enhancement System part #TFR350SDJ which is for a Ford F-350 is that the latter comes with a 1/2" spacer,…

view full answer...

Answer 12

From the top of the bracket to the bottom of the rubber spring the #TFR350SDJ Timbrens measure about 7-1/2 inches. When installed you ideally want about a 1/2 inch to an inch of space between the Timbren and its contact point. However, to install…

view full answer...