Will the TireMinder TPMS for RVs Work On a Boat Trailer

Question

Question:

Have these transmitters been used on a boat trailer where they’re going to get submerged when launching/loading the boat in water?

asked by: Dan P

0

Expert Reply:

Yes, the TireMinder TPMS # TM89FR have been used on boat trailers without issue. I spoke with TireMinder before about this and they stated so long as you do not leave the sensors submerged under water for extended periods of time you will not have issues. If you were simply launching the boat you would be just fine.

expert reply by: Conner L

0

Answer 1

The TST TPMS for RVs part #TST-507-RV-4-C is a very useful device that not only allows you to monitor tire pressure but also tire temperature which is a big one. It will work just fine on a boat trailer as well even if submerged under water. I will…

view full answer...

Answer 2

What you can do is get the TireMinder i10 TPMS for RVs - LCD Monitor - Signal Booster - 4 External Tire Sensors #TM89FR and then also order 3 of the part #TM-2ALUM which comes with 2 of the aluminum tire sensors. This will give you the 6 aluminum…

view full answer...

Answer 3

Yes the TST TPMS for RVs #TST-507-FT-4 that you referenced can fit on rubber valve stems of a trailer wheel.

view full answer...

Answer 4

Per TireMinder, all TireMinder systems are IPX7 compliant and can used on a boat trailer that launches into fresh or salt water without running into any issue with your transmitters. This means the TireMinder i10 TPMS for RVs and Trailers w/ Signal…

view full answer...

Answer 5

Hey Les thanks for your question. The flow through sensors that come with the TireMinder #TM38FR can be used on rubber, steel, chrome, or nickel valve stems. So while steel valve stems are considered a bit stronger and more durable than rubber, if…

view full answer...

Answer 6

The flow through feature of the TST TPMS for RVs - Grayscale Display - Signal Booster - 4 Flow Through Tire Sensors #TST-507-FT-4 will still work on rubber valve stems, though TST does recommend that metal valve stems are used with these sensors. You…

view full answer...

Answer 7

The TireMinder i10 TPMS for RVs and Trailers w/ Signal Booster #TM89FR is the current version that does have the Rhino signal booster that you mentioned.

view full answer...

Answer 8

By 'transmitter', I believe you're speaking of the repeater/booster included with the #TM79FR Tire Minder TPMS that boosts the signal from the sensors to the monitor. The folks at Tire minder tell me that the installing the booster inside…

view full answer...

Answer 9

The difference is basically the monitor setup. The part #TM79FR comes with a monitor whereas the #TM56FR is designed to sync to a smart phone. The #TM79FR does not have a way to connect to smart phone.

view full answer...

Answer 10

Yes, the sensors that come with the TireMinder TPMS #TST-507-FT-4 are indeed waterproof and are suitable for boat trailer wheels. The transmitter is also waterproof, however TireMinder does not recommend the transmitter box be submerged more than 30…

view full answer...

Answer 11

We have the following Gen-Y shock absorbing 5th wheel pin boxes which are compatible with the Lippert Rhino pin box bolt pattern. The weights listed below are the maximum capacities the pin box is capable of supporting. 21,000 lbs - 3.5K TW #GY86GR…

view full answer...

Answer 12

Yep, the fit kits for a Thule roof rack on a 2022 Ford F-250 and 2019 F-150 Crew cab are indeed the same; they're not part 521 though, the correct part number is the following: - Fit Kit for Thule Evo Clamp and Edge Clamp Roof Rack Feet - 5271…

view full answer...

Will the TireMinder TPMS for RVs Work On a Boat Trailer

Product Page this Question was Asked From

Continue Researching