Replacement Cover for Original Truxedo for 2002 Ram 1500 with 6-1/2 Foot Bed

Question

Question:

I have to replace cover only, on my 2002 dodge ram and my rails show P/N 1113645. on the rails. Will item #1115827 work on my bed with existing supports and tailgate bar or is there a different #

asked by: Steven S

0

Expert Reply:

I have a solution for you, but the # TX1115827 is not the correct cover for your Original Truxedo. The correct replacement cover for the Original Truxedo for a 2002 Ram 1500 with 6-1/2 Foot Bed is the # TX3466-CVR. This is the tarp/cover only and will work on the Truxedo part number 3466-01 which was designed to fit on your 2002 Ram 1500 with 6-1/2 Foot Bed.

expert reply by: Erik B

0

Answer 1

Truxedo offers the replacement Velcro strips part #TX1115174 that will fit the original Edge tonneaus they offer. This would be the kit you would need.

view full answer...

Answer 2

I spoke with TruXedo and they were able to identify the cover you have as the TruXedo Original Tonneau Cover based on the side rail shape therefore the correct replacement tarp for you is the Replacement Tarp for TruXedo Original Tonneau Cover part…

view full answer...

Answer 3

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 4

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 5

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 8

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 9

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 10

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Answer 11

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Replacement Cover for Original Truxedo for 2002 Ram 1500 with 6-1/2 Foot Bed

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching