Wiring Diagram For All In One Connector From Brake Buddy Stealth System

Question

Question:

What is the wiring diagram for the round 6 pin male connector that is one end of the umbilical cord. I have a 2017 Jayco Precept towing a 2019 Ford Ranger and I’m installing the stealth system

asked by: Dan K

0

Expert Reply:

One end of the umbilical cord that comes with the Brake Buddy Stealth Supplemental Braking System part # HM39530 is a 7-blade round connection that connects to motor home's 7-way plug. The other end is a 7-flat connector that plugs into the all-in-one connector on the Ford Ranger. I have attached a wiring diagram for the all in one connector for your reference.

expert reply by: Heather A

0

click to enlarge

Les T.

3/21/2024

Hi Can you tell me where I can purchase a Breakbuddy stelth all in one conector as mine has a flat. I’m in UK

Reply

Heather A.

4/9/2024

@LesT We unfortunately do not ship to the UK. If you can find a hub that we can ship it to and they can ship it to you the part number is part # HM39531 for the all in one connector.

Reply

Mel P.

9/5/2020

I need to make sure my motorhome plug is correct. I would like to see color codes as looking into the MH receiver. Thanks

Reply

Jon G.

9/8/2020

Are you talking about the 7-Way on your motorhome? If that's the case then I wouldn't know what color wires are used, but I do know what functions you need to test for to make sure everything is wired correctly. Check out the linked help article and scroll down to where it has the "Vehicle Side 7-Way" diagrams and compare that you what you find on your motorhome.

Helpful Links

faq-wiring.aspx

Reply

Answer 1

To flat tow certain vehicles, the ignition might be in a position that would normally activate certain accessories on the vehicle that would drain the batteries and aren't necessary while towing. To avoid this, some manufacturers instruct you to…

view full answer...

Answer 2

The BrakeBuddy Towed Vehicle Battery Charge Kit part #BB54FR comes with a the Brake Buddy Select 3 Portable Supplemental Braking System part #HM39524. I have attached a wiring diagram of how this is setup with the Brake Buddy.

view full answer...

Answer 3

There is not currently an adapter available so you will have to splice some wires together to install the Brake Buddy Stealth Supplemental Braking System - Proportional #HM39530 in your 2020 Jayco Greyhawk. The brake controller of this system has 4…

view full answer...

Answer 4

If you already trimmed the excess cable off when installing the Brake Buddy Stealth Supplemental Braking System - Proportional Item #HM39530 you might not have enough to add more slack to the line. Around the 8 minute mark of the attached video David…

view full answer...

Answer 5

The Mopar RV tow wiring harness 82211156AB you referenced is a fit for 2007-2018 JK Wranglers. If that is what you have, then you can use the Roadmaster InvisiBrake Supplemental Braking System #RM-8700 but you will need to splice into the harness. My…

view full answer...

Answer 6

To flat tow your Jeep Wrangler JK behind your motorhome, you will need a base plate kit, tow bar, safety cables, tail light wiring harness, and a supplemental braking system. Depending on the year of your Wrangler, you may also need a Brake-Lite…

view full answer...

Answer 7

If you do not have a 7/8" pin and need a larger one, you will need the Blue Ox Aftermarket Bumper Adapter - 1" Pin #BX88358. This includes pins, clips, washers, and lock nuts and will get you the clearance needed to fit your Smittybilt XRC…

view full answer...

Answer 8

There's good chance the fuse for your cigarette lighter socket is blown on your vehicle and that is why the Brake Buddy Classic #HM39494 is not powering on. I would recommend checking the fuse associated with this circuit on your vehicle and you…

view full answer...

Answer 9

First thing you want to do to set up your Brake Buddy Select 3 Portable Supplemental Braking System - Proportional Item #HM39524 in your 1994 Jeep Wrangler is make sure your seat is slid all the way back. Second make sure the brake pedal clamp is not…

view full answer...

Answer 10

The Replacement Control Unit for Kwikee Electric RV Steps #LC379146 which is part 90950600 you referenced is does not have a specific wiring diagram, but I've attached the closest thing and have also included a video of an installation to…

view full answer...

Answer 11

Yes, you will be able to flat tow your 2018 Chevrolet Sonic RS with turbo. In fact, we have setup a 2018 Chevrolet Sonic RS for flat towing before. You will need the following items to flat tow your vehicle. Blue Ox Avail Non-Binding Tow Bar -…

view full answer...

Answer 12

Looks like you have a round 4-way connector in the picture you submitted. The colors you mentioned aren't totally a match for standard colors but they are close. Normally the colors are: White - Ground Return Green - Right Turn and Brake Lights…

view full answer...

Wiring Diagram For All In One Connector From Brake Buddy Stealth System

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching