Recommended Towing Mirrors for 1987 Toyota 4Runner

Question

Question:

Is this a towing mirror

asked by: Tamara

0

Expert Reply:

I have a solution for you, but the CIPA Universal Door Mount Truck Mirror # CM41100 is not a towing mirror. If the mirrors on your 1987 Toyota 4Runner are between 4-1/2" to 11-1/2" tall you can use the K-Source Universal Towing Mirrors # KS3891-2, which will provide a secure connection to your factory mirrors and give you an extended view of your SUV and trailer.

If you've got mirrors that are a different size, please let me know how tall your mirrors are and I can work to find a suitable alternative.

expert reply by: Erik B

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

I spoke to a representative from CIPA. He told me the mirror in the CIPA Universal Door Mount Truck and Van Mirror - Black, part #CM41100, is not removable. I have included a video demo link below.

view full answer...

Answer 6

The filter kit part #CAM40631 that you referenced will work just fine when mounted horizontally or vertically. I confirmed this with my contact at Camco.

view full answer...

Answer 7

Yes, the Wheel Masters Eagle Vision Universal Extendable Towing Mirrors #WM6600-2 do fit your 2012 Nissan Pathfinder. They attach at the top and the bottom of the door. I also attached a review video for these mirrors for you to check out as well.

view full answer...

Answer 8

You should be getting 12 volts on the running light circuit when the running lights are turned on. If not, the problem is either in the connector or upstream from there. The first thing you should check is the trailer connector on your towing…

view full answer...

Answer 9

Yes you can remove the mirror from the mounting bar it attaches to. There's actually two holes on the mount that you can use for the mirror to attach to. A bolt is what holds the mirror of the #CM41100 to the swiveling mount bracket.

view full answer...

Answer 10

I do have a set of extension towing mirrors that are confirmed to fit your 1996 Ford F-150 but the K-Source Universal Towing Mirror part #KS3891 have yet to be tested. However, as long as your factory side mirrors are between 4-1/2" to…

view full answer...

Answer 11

We don't carry just a hardware kit for the bolts of a B and W gooseneck hitch part #BWGNRK1313. Your best option would be to take the following list of bolts to your local hardware store so that you can piece together everything you'd need.…

view full answer...