Do Wheel Masters Eagle Vision Universal Extendable Towing Mirrors Fit 2012 Nissan Pathfinder

Question

Question:

will these mirrors fit a 2012 Nissan pathfinder?

asked by: Mariyn J

0

Expert Reply:

Yes, the Wheel Masters Eagle Vision Universal Extendable Towing Mirrors # WM6600-2 do fit your 2012 Nissan Pathfinder. They attach at the top and the bottom of the door. I also attached a review video for these mirrors for you to check out as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Manufacturers will make custom-fit towing mirrors for very high sales volume tow vehicles, such as a Ford F-150 or Chevy Silverado pickups, but for other vehicles like SUVs (even popular ones like the Expedition) the sales volume potential is just…

view full answer...

Answer 2

You are correct that the Wheel Masters Eagle Vision Universal Extendable Towing Mirrors #WM6600-2 and the CIPA Universal Deluxe Door-Mount Mirrors #11650-2 are very similar and that they do install in the same manner on a vehicle door. If the truck…

view full answer...

Answer 3

Since none of our slip on tow mirrors fit your 2006 Chevy Silverado the best solution we have would be a door mounted tow mirror like the Wheel Master Eagle Vision part #WM6600-2 which would work well. The stability, adjustability, and wide range…

view full answer...

Answer 4

The Wheel Masters Eagle Vision Universal Extendable Towing Mirrors item #WM6600-2 are flat. These mirrors telescope out up to 17" to expand your view of the road and your trailer. They are a universal fit and are sold in pairs.

view full answer...

Answer 5

The K-Source Snap & Zap Towing Mirrors #KS81850 are designed for the Ford F-150 but they haven't been confirmed for your Expedition. For the 2017 Ford Expedition I suggest the K-Source #KS3990 towing mirrors. They'll fit mirrors that are…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Do Wheel Masters Eagle Vision Universal Extendable Towing Mirrors Fit 2012 Nissan Pathfinder

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching