Availability of Slip-On Towing Mirrors for 2020 Toyota Tundra

Question

Question:

Do you have slip on for 2020 tundra?

asked by: Kyle L

0

Expert Reply:

The CIPA # CM11300 Slip-On Towing mirrors are a fit for your 2020 Tundra as long as they don't have the externally mounted turn signals (turn signal indicators within the mirror glass itself are okay).

The K-Source # KS81300 would also work and has no listed fit limitations, but they are a friction fit. They snap in place, and fit pretty tightly. The only downside to that is that is that the plastic housing can get stiffer in cold weather and not be as pliable. If I had to choose between the two, I'd pick the CIPA # CM11300.

expert reply by: Mike L

0

Answer 1

Both the K-Source towing mirrors, #KS81300, and the CIPA towing mirrors, #CM11300, do fit if your 2012 Toyota Tundra has electric and/or heated stock side mirrors. They will not fit Limited or Platinum models though. I agree that the K-Source mirrors…

view full answer...

Answer 2

The K-Source Towing Mirrors part #KS70103-04T are confirmed to work on your 2010 Toyota Tundra SR5. You will retain all of the functions your factory mirror had, but won't gain any that weren't there to begin with. The mirrors are plug and…

view full answer...

Answer 3

You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…

view full answer...

Answer 4

The Curt 2" Hitch Ball #C69FR has a 1-1/4" diameter shank, and for hitch balls with that size shank you will want to use a 6-point hex wrench with a 1-7/8" end. We do not carry these, but they can be found pretty easily at any local…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hello Dan, I can definitely help with this. It is completely normal for the Curt TriFlex brake Controller #C24VV to show the current gain setting when the brakes are applied, or when the manual override is pressed. It sounds like you have the gain…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Yes we do have a set of Timbrens that fit your 2024 Toyota Tundra with the part #T45MR. These can give you up to an additional 6,000 lbs of suspension support.

view full answer...

Answer 10

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 11

Hello Kendall. The K-Source Universal Towing Mirrors #KS69ZR are going to be your best bet for the 2022 Toyota Tundra Limited. We have double checked with the manufacturer and confirmed that they will fit the Limited models with full chrome or…

view full answer...

Answer 12

Yes, we have the K-Source Universal Towing Mirrors #KS69ZR which will fit your 2024 Toyota Tundra. These towing mirrors are easy to install, has mirror face dimensions of 7-3/4" tall x 5-1/8" wide, and has rubber pads on the straps to avoid…

view full answer...