Air Lift LoadLifter 5000 Ultimate Air Helper Springs Compatible with 2016 Ford F-250 Super Duty

Question

Question:

Will the airlift system work on a lift 2016 Superduty?

asked by: Derek

0

Expert Reply:

Air Lift does make a kit for your 2016 Ford F-250 Super Duty, however, the # AL88399 is not going to work since it's only compatible with 2017-2019 Ford Super Duty pickups.

The correct Air Lift LoadLifter 5000 Ultimate Air Helper Springs for your truck are part # AL88395 for 2 wheel drive, or # AL88396 if you have a 4 wheel drive.

Unless the lift on your truck is a body lift, you'll need a spacer kit as well. If your truck does have a suspension lift, measure the distance between the upper and lower brackets and subtract the height of the air spring you're going to be install. In this case, 6 inches for the two options mentioned above. If that difference is 4 inches, you'll need part # AL52440. If that difference is 2 inches, use part # AL52420.

Either one will pair up nicely with a compressor like the Heavy Duty Air Lift Load Controller Compressor System # AL25856, which gives you the convenience to control the air springs independently.

expert reply by: Carla M

0

click to enlarge

Answer 1

For your 2019 Ram 2500, I recommend the 5,000 lbs Air Lift LoadLifter Air Helper Springs item #AL57289 over the higher capacity 7,500 lbs item #AL57589. 5,000 lbs capacity is more than enough for your truck. The higher capacity ones would affect the…

view full answer...

Answer 2

Thank you for your purchase from etrailer of the Air Lift WirelessONE Compressor #AL25980EZ. The pink wire is an optional ignition source connection and does not have to be hooked up; it will just allow the #AL25980EZ to make adjustments right when…

view full answer...

Answer 3

The correct Air Lift LoadLifter 5000 Air Helper Springs for a 2011-2016 Ford F-250/F-350 (4x4) is part #AL57396. The correct Air Lift LoadLifter 5000 Air Helper Springs for a Dodge Ram 2500 is part #AL57295. These kits do both use the same airbag so…

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 6

There are a number of differences between the Firestone Ride-Rite Air Helper Springs #F2445 and Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88299, starting with fit. While the Air Lift will fit all models of the 2018 Toyota Tundra, the…

view full answer...

Answer 7

The Air Lift WirelessONE Compressor System #AL25980EZ and Air Lift WirelessONE Compressor System #AL25980 are nearly identical with only some very minor differences in CFM and duty cycle ratings. The #AL25980EZ will also come with an easier mounting…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey Richard, thanks for reaching out! The Air Lift LoadLifter 7500 XL Air Helper Springs #AL57541 does take up the same space as the Curt 19419346 5th wheel bracket kit for your 2024 GMC Sierra 3500. The only way to remedy this is to use the…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Air Lift LoadLifter 5000 Ultimate Air Helper Springs Compatible with 2016 Ford F-250 Super Duty

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching