Accessing Back of Furrion Fireplace Installed in RV to Reset By Unplugging

Question

Question:

Says to unplug, but how do we do that with installed unit.

asked by: Perry

0

Expert Reply:

There should be a way to access the back of the fireplace but it will depend on your RV. Most likely there's a cabinet like door on either side of the fireplace that you'll be able to open and get access to the power wire of the Furrion fireplace # F30SW15ABL.

For example, if you check out the picture I attached you can see a door to the side of the fireplace.

expert reply by: Jameson C

0

click to enlarge

Answer 1

We've spoken with Furrion about your same issue with another customer and they informed us that the 88 error code on your Furrion fireplace means the blower fan is overheating. You want to make sure the inlet and outlets of the fireplace are…

view full answer...

Answer 2

That's a cool set up, thanks for the photo. As for the Furrion RV Electric Fireplace #F30SW15ABL, it vents out of the front of the fireplace, as you mentioned with there not being anything in the back. So it should not be necessary to have…

view full answer...

Answer 3

I attached a picture that has all of the dimensions for the Furrion fireplace part #F30SW15ABL that you referenced. The cutout portion though measures 25-5/16 inches wide by 15-13/16 inches tall. Your cut out dimensions are a bit larger than needed…

view full answer...

Answer 4

Since the Furrion RV Electric Fireplace with Logs - 30" Wide - Recessed Mount - Black Item #F30SW15ABL is electric it's all self contained and the vents are just there to help to motor breathe. You don't need to install any extra venting…

view full answer...

Answer 5

Cleaning the inlet and outlets on your Furrion RV Electric Fireplace #F30SW15ABL may not permanently solve your issue if the airflow in your trailer is not adequate. Having inadequate airflow in your trailer will cause your fireplace to continually…

view full answer...

Answer 6

I attached a picture that has all of the dimensions for the Furrion fireplace part #F30SW15ABL that you referenced. The cutout portion though measures 25-5/16 inches wide by 15-13/16 inches tall.

view full answer...

Answer 7

The blinking 88 code on your Furrion RV Electric Fireplace with Logs - 30" Wide - Recessed Mount - Black #F30SW15ABL, or any other Furrion Fireplace, means that the blower fan is overheating. You will want to make sure the inlet and outlets on…

view full answer...

Answer 8

Cleaning the vents on your Furrion RV Electric Fireplace #F30SW15ABL is great first start but this may not permanently solve your issue if the airflow in your trailer is inadequate. Inadequate airflow will also cause the fireplace to throw an 88…

view full answer...

Answer 9

Yes, the Furrion 30" Electric Fireplace #F30SW15ABL referenced in your question is designed to be installed flush against the wall into a recessed opening. The thin trim border on the unit will still extends out from the wall (maybe about a 1/8…

view full answer...

Answer 10

Yes, the Furrion RV Electric Fireplace with Logs, #F30SW15ABL can be fit into the space you list. This requires a cutout dimension of at least 26-1/4" W x 16-1/4" H x 5" D. Your dimensions of 28-1/4 X 19 X 8 provides the needed room…

view full answer...

Answer 11

The heat from the Furrion RV Electric Fireplace with Logs - 30" Wide - Recessed Mount #F30SW15ABL does blow out the front, at the ventilation strip on top. This is a recessed, flush-mount electric fireplace, and I have added a link to a video…

view full answer...

Answer 12

The 'BB' is actually an '88', which means that the fireplace blower fan is overheating. This most commonly occurs if the vent air intake atop the unit and the mesh on the front of the fireplace is partially or fully obstructed. Once…

view full answer...

Accessing Back of Furrion Fireplace Installed in RV to Reset By Unplugging

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching