Will the Curt Trailer Hitch Receiver C13418 Fit a 2020 Chevrolet Blazer RS

Question

Question:

Just need to verify Curt 13418 Trailer hitch will work on 2020 Blazer RS before i order. Different places say yes and no. Thanks

asked by: Dion R

0

Expert Reply:

The Curt Trailer Hitch Receiver part # C13418 is indeed a confirmed fit for a 2020 Chevrolet Blazer RS. In fact, I installed this hitch personally on a 2019 Chevrolet Blazer RS and there were no changes from the 2019 to 2020 model year so I know it works. I also confirmed this with Curt as well just as a precaution.

If you will be towing then you will also need a trailer wiring harness, the Curt T-Connector Vehicle Wiring Harness part # C56325 if you need a 4-way or part # C56326 if you need a 7-way are both plug and play options. If you do need a 7-way then odds are you also need a brake controller, the Curt Echo Mobil Brake Controller part # C51180 is what I recommend for this since it's wireless which means no wire splicing or drilling into the dash to mount.

Please note, if you go with the 7-way you also need part # 18136 and part # PK12711U for mounting. I have attached an install video of the Curt Trailer Hitch Receiver on a 2019 Chevrolet Blazer RS as well.

expert reply by: Conner L

0

Answer 1

Yes, the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part #C13418, will fit your 2022 Chevrolet Blazer. It is a Class III hitch receiver with a maximum tongue weight of 750 lbs and a maximum gross trailer weight of 5,000 lbs. I…

view full answer...

Answer 2

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 6

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 11

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 12

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Will the Curt Trailer Hitch Receiver C13418 Fit a 2020 Chevrolet Blazer RS

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching